677221

Abilia 808140 - IR-5SP Manual

8
Zoom out
Zoom in
Previous page
1/24
Next page
8
Replicating Channels from another Transmitter
Make sure the batteries in both transmitters have full capacity. Do not place the
transmitters in intense light (e.g. sunlight) when programming.
1. Place the two transmitters on a table with the original
transmitter directed towards the rear part of IR-5SP (fig
3).
2. Using the -key choose the IR-5SP level to be
programmed. Only one level at a time can be
programmed.
3. Press
P
and
1
at the same time. The indicator lamp
rapidly flashes orange and then goes out. The lamp for
the present level begins to flash.
To check that the transmitters are in the right position,
keep any key pressed on the original transmitter. Move
the original transmitter to the left or to the right until the
indicator lamp goes out. Then move the original
transmitter backwards until the indicator lamp goes out
(one meter for certain transmitters). Place the original
transmitter centrally between these positions. Certain
types of transmitters only emit a short flash each time the key is pressed. In
these cases, press several times.
4. Press and release the key on IR-5SP which is to be programmed. The
indicator lamp now emits a steady orange light.
5. Keep the corresponding key on the original transmitter pressed. Release the
key when the indicator lamp goes green. It might take up to 10 seconds. If the
indicator lamp goes orange again press the key one or more times until the
lamp flashes green and goes out. The indicator lamp flashes green if the
programming has been successful. If the indicator lamp flashes red the
programming has failed. Try once more from step 4. If a beep is heard
the level is locked and no programming can be made. Read the next section
for how to unlock a level.
6. If the programming of the first key was successful, repeat steps 5 and 6 until
all keys are programmed. Finish by pressing the -key. The indicator lamp
flashes green to indicate that the programming is complete.
Fig 3
… 8 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Abilia 808140 - IR-5SP at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Abilia 808140 - IR-5SP in the language / languages: English as an attachment in your email.

The manual is 0,5 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info