3
Introduction
IR-5SP is a programmable IR transmitter which can be programmed with IR-
channels from different types of existing IR remote controls for TV, VCR, HIFI
and satellite sets. It has 20 different programming locations on 4 levels. The
different levels are accessed by pressing one of the 6 keys. IR-5SP is a part of
the ”Gewa Smart House” concept and can therefore be used together with all the
other products in the range.
News and Improvements
IR-5SP is improved in several ways compared to the earlier generation IR-5SO:
Possibility to program it with IR channels from other transmitters
Adjustable sound signal
Adjustable delay time when pressing a key
Possibility to program key sequences (macro)
Possibility to copy channels/codes between different keys
Possibility to save channels/codes and settings in a computer
Possibility to transfer channels/codes between two transmitters
General Information about IR-5SP
Before using IR-5SP there are certain things you should know.
On delivery the Gewa Link channels are factory programmed which means
that it is possible to use the transmitter as soon as a battery has been inserted.
See section ”Inserting the Battery”.
For programming press the programming button using a pen for example at
the same time as you choose a function key. Choose different function keys
depending on what you want to program.
If the wrong key is pressed by mistake during programming, the
programming button on the side of IR-5SP will function as a reset button.
It is important not to wait too long between the different steps when
programming. After a certain time IR-5SP automatically leaves the
programming state to save power.
3.0 as a superscript indicates the version of IR-5SP that is needed
The picture shows various terms and functions which will be found in the text.
