677197

Abilia 464031 Emfit Monitor Manual

15
Zoom out
Zoom in
Previous page
1/36
Next page
15
9. Connectors and cables
Connector symbols can be found at the bottom of the
control unit. (picture 3)
vX1 Connector for an external power supply. Only
use Globtek inc. power supply (see chapter Technical Specifications for details) which can
be obtained as an original accessory from Abilia.
X2 AUX Connector to connect the device to a nurse call system, a personal
emergency phone or an external wireless transmitter. The connector may only be
connected to a system safety voltage input with max. voltage below 25 V(AC) / 60 V (DC),
where both poles have been separated from the electrical network. Max. load current
100 mA.
X3 - Sensor connector. Only use the Emfit bed sensor.
Connect the bed sensor (picture 13), the power supply delivered as an accessory (picture
14) and any connector cables (picture 15) according to the pictures.
9.1 X2 (AUX) Connector Pin Order (picture 16)
From left to right:
Pin 1
Common return
Pin 2
Normally Open (NO) send
Pin 3
Normally Closed (NC) send
Pin 4
Low Battery send (NC)
Pin 5
Not in use, do not connect
Pin 6
Not in use, do not connect
Pin 7
Not in use, do not connect
Pin 8
Not in use, do not connect
10. Installation of the control unit
10.1 With wall mounting bracket
1) Fix the mounting bracket onto a wall with the plugs and screws supplied. (picture 17)
2) Slide the control unit onto the wall mounting bracket. (picture 18)
3) Press the control unit down until you hear a click. (picture 19)
10.2 With bed side clip
Press the control unit down to the clip. (picture 20)
10.3 On table
Place the control unit on the table led lights facing upwards.
… 15 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Abilia 464031 Emfit Monitor at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Abilia 464031 Emfit Monitor in the language / languages: English as an attachment in your email.

The manual is 1,09 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Abilia 464031 Emfit Monitor

Abilia 464031 Emfit Monitor User Manual - German - 36 pages

Abilia 464031 Emfit Monitor User Manual - Dutch - 36 pages

Abilia 464031 Emfit Monitor User Manual - French - 32 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info