677197
8
Zoom out
Zoom in
Previous page
1/36
Next page
8
3. Introduction
These instructions for use describe the use of the Emfit MM, Tonic-Clonic Seizure
Monitor. The version number and details can be found in chapter 23. Technical
specifications.
Use the device only in the ambient conditions specified by the manufacturer. For
detailed information, refer to Technical Specifications in these instructions for use.
Follow all instructions provided in this document concerning the installation, use and
cleaning of the device.
Based on the intended use, point 1) of section 3.2 below, the Emfit Tonic-Clonic
Seizure Monitor is a medical device as defined in the Medical Device Directive
93/42/EEC. Based on the nature of point 2) regarding the intended use, the device is
not defined as a medical device (Directive 93/42/EEC, Article 1(2), subparagraph a).
The device is a Class I medical device in accordance with the Medical Device
Directive 93/42/EEC and carries the CE marking accordingly.
3.1 Product description
Emfit Tonic-Clonic Seizure Monitor (later “product”) is a movement monitor that is used to
detect and notify tonic-clonic seizures.
The product consists of a bed sensor located under the mattress and a control unit where
the bed sensor is connected. Control unit should be placed on a table, clipped on bed or
mounted on wall.
The control unit notifies caregiver by flashing led and sound (unless muted) and/or
transfers a notification via external system e.g. a nurse call system or a personal
emergency phone.
Operating environment is typically bedroom at care-home or home.
3.2 Intended use
The product is intended to be used to assist in sensory monitoring and to notify the
caregiver
1) of the body movements of a person lying on a mattress equipped with the under-
mattress sensor due to a tonic-clonic seizure while sleeping.
2) of the presence of the monitored person on the mattress equipped with the under-
mattress bed sensor and if he or she gets up from the mattress.
The device may either be used
solely for the task described in point 1) above,
for the tasks described in points 1) and 2) above simultaneously.
NOTE 1
The manufacturer cannot guarantee that the device will detect all episodes of tonic-clonic
seizure-induced body movements of the monitored person.
NOTE 2
The device may trigger a false body movement notification, especially if the person lying
on the mattress fitted with the under-mattress bed sensor is awake.
8


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Abilia 464031 Emfit Monitor at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Abilia 464031 Emfit Monitor in the language / languages: English as an attachment in your email.

The manual is 1,09 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Abilia 464031 Emfit Monitor

Abilia 464031 Emfit Monitor User Manual - German - 36 pages

Abilia 464031 Emfit Monitor User Manual - Dutch - 36 pages

Abilia 464031 Emfit Monitor User Manual - French - 32 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info