677184

Abilia 464020 - Emfit SafeFloor Manual

7
Zoom out
Zoom in
Previous page
1/20
Next page
7
3. General Information
3.1 Intended use
The Emfit SafeFloor Bed and Door Exit Monitor (device model D-1050-2G and sensor
model L-6090SL or L-60150) is intended to be used for monitoring a bed or door exit and
giving notification when person is stepping on the sensor. The product consists of a floor
sensor and a control unit. The control unit has an audible notification sound and a dry-
contact output for connecting it to the other parts of the system.
3.2 Control Unit
The control unit D-1050-2G gives a notification after it has noticed
a step on a sensor. A 6 second delay can be set for caregivers by
pressing the by-pass switch (SW1) and pass through the doorway
without activating a notification. The control unit processes a low
voltage (from about 1 mV up to about 1 V), high impedance signal
from the dynamic, quasi-piezoelectric type (i.e. self-biased)
flexible film-like sensor.
The control unit operates with 2 pcs AA size 1.5 V alkaline
batteries. An optional AC adapter is available. Do not use any
power supply other than that provided by Abilia. (see chapter
22. Technical specifications for details).
The control unit has input connectors for the AC adapter and
sensor. There is also a connector for connecting the device to
other systems for transferring the notification via dry-contact optocoupler. A reset switch
for turning off the notification sound is marked as SW1.
Inside the device there is a place for 2 standard AA size 1.5 V alkaline batteries, and mini-
switches (DIP and rotary) for program settings.
3.3 Floor Sensor
The Emfit floor sensor is a quasi-piezoelectric,
dynamic sensor that has no embedded wires
or switches. This specially formulated plastic
sheet sensor model L-6090SL is placed on top
of the flooring. Sensor model L-60150 is
intended to be installed below flooring. The
sensor produces signals from even the
slightest movement on the sensor.
4. Package contents
• A control unit
• Floor sensor
• A wall mounting bracket with two screws and two plugs
• Clip for bed side attachment
• This manual
• Two AA size 1.5 V alkaline batteries
• Optional power supply (see chapter Technical Specifications for details)
… 7 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Abilia 464020 - Emfit SafeFloor at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Abilia 464020 - Emfit SafeFloor in the language / languages: English as an attachment in your email.

The manual is 1,03 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info