9
3.7 Découvrez la fonction d’analyse de GEWA Connect
Pour ce faire, vous avez besoin d'un interrupteur connecté au port SW1 ou SW2 de la
Multibox.
Suivez ces étapes pour accéder à un bref tutoriel consacré aux fonctions d’analyse par
ligne et par point :
1. Appuyez sur l’interrupteur pour démarrer la fonction d’analyse par ligne (par défaut).
2. GEWA Connect démarre l’analyse de tous les objets affichés à l’écran.
3. Appuyez sur l’interrupteur pour sélectionner un objet.
4. Le menu Clic s’affiche ; choisissez la commande Appui bref pour « appuyer » sur
l’objet.
5. Appuyez longuement, pendant 2,5 secondes, sur l’interrupteur pour afficher le menu
Appui long.
6. Choisissez Changer pour activer la fonction d’analyse par point.
7. GEWA Connect commence à analyser verticalement le contenu de l’écran. Appuyez
sur l’interrupteur pour sélectionner la zone, puis appuyez de nouveau sur l’interrupteur
pour définir une position plus précise.
8. GEWA Connect commence à analyser horizontalement le contenu de l’écran.
Appuyez sur l’interrupteur pour sélectionner la zone, puis appuyez de nouveau sur
l’interrupteur pour définir une position plus précise.
9. Le menu Clic s’affiche ; choisissez la commande Appui bref pour « appuyer » sur
l’objet.
10. Patientez 10 secondes ; la fonction d’analyse s’arrête (le réticule disparaît).
Si vous souhaitez modifier les paramètres d’analyse, ouvrez l’application GEWA Settings ;
reportez-vous au chapitre 5. GEWA Settings.
3.8 Découvrez comment programmer GEWA Connect pour contrôler
votre environnement
Adaptez GEWA Connect avec des fonctions de contrôle de l'environnement selon les
besoins de l'utilisateur. Pour plus d’informations sur l’application GEWA Connect, reportez-
vous au chapitre 6. Application GEWA Connect.
3.9 Découvrez la fonction Alerte
La fonction Alerte est utilisée pour attirer l'attention d’une personne. Pour activer l’alerte, il
faut appuyer sur l’interrupteur pendant 8 secondes. La fonction Alerte peut être réglée pour
activer la sortie de relais, envoyer un signal IR ou un signal GR. Un signal sonore est émis
par la Multibox lorsque la fonction Alerte est activée. Pour configurer la fonction Alerte,
reportez-vous au chapitre 5.7 Alerte.