Manual Abilia 429000 - Gewa Control Omni (page 31 of 52) (English)

677185

Zoom out

Zoom in

1/52

Setting the Alert function

The “Alert” is used when you want to attract somebody’s attention. Your Control Omni can

activate the Alert in different ways:

 Transmit an IR-signal which activates a relay in an IR receiver.

 Transmit an RF-signal which activates a relay in a radio receiver.

 Send an SMS with the built-in telephone.

 Call a telephone number with the built-in telephone.

 Activate the built-in relay output.

When selecting function an IR-signal, an RF-signal, a telephone number or SMS is also set.

Note! Several functions can be activated simultaneously.

The relay function is to be connected to the same input as the switch. If you need to connect

both a switch and a relay function, a Control Omni Y connector is needed. The Y connector

can be ordered separately (item no 429050).

Set the Alert function by using the following procedure:

 System  Alert function  Select way to alarm

Warning!

When using the “Alert” function you must be aware of the fact that batteries may

run out, connected plugs may be disconnected unintentionally, you may struggle to

reach the switches, the telephone network is down etc. The Alert function must not

be used as emergency alarm and never be used if a person is in danger if the Alert

fails.

Using the Alert Function with a switch

If an external switch is pressed for 1-15 sec. the alert will be activated. The time is set from 1-

15 sec. or can be switched off completely. When activating the alert function a symbol will be

shown on the screen with a sound signal. To choose how the alert is to be activated see

previous section Setting the Alert function on page 27.

Set time by using the following procedure:

 System  Alert function  Switch time  Select time

Default setting: Switched off

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Abilia 429000 - Gewa Control Omni in the language / languages: English as an attachment in your email.

The manual is 2,74 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Abilia 429000 - Gewa Control Omni

Abilia 429000 - Gewa Control Omni Manual - English - 29 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info