677226
10
Zoom out
Zoom in
Previous page
1/16
Next page
10
Channel setting
Channel settings are made by scraping or connecting joints between soldering pads on the
circuit board. These spots are marked A, B and C in fig 3. The table shows which channels
can be used and which joints should be scraped off or connected.
GewaLink-
channel
Joints A
Joints B
Joints C
16
17
18
19
20
* 4096 code
(random)
35
* From serial number: 421012 channel 21 has been replaced with a random 4096 code.
Mounting Gewa IR-1S Micro
The IR-1S Micro can be used hanging on a strap around the neck. Thread the thin loop of
the neck strap through the attachment loop on the transmitter. Adjust the length of the neck
strap.
Warning!
The string lock is a safety feature to prevent strangling. Make sure that the ends of the neck
strap can be pulled out eg. if the transmitter gets caught on something. Never make knots in
the neck strap!
Cleaning
Your IR-1S Micro can be cleaned with a damp cotton wool pad with surgical spirit,
Chlorhexidine or ethyl alcohol.
It can also be cleaned with a damp cloth (weak solution of washing up liquid). Wipe dry after
cleaning.
Warning!
Do not use any disinfectant except surgical spirit, Chlorhexidine or ethyl
alcohol.
These liquids are inflammable, handle with care!
Operating Environment
The IR-1S Micro is designed for use indoors and outdoors but should be protected against
splashing liquid.
Fig 3
A
B
C
10


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Abilia 4019 - IR-1S Micro at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Abilia 4019 - IR-1S Micro in the language / languages: English, German, Swedish as an attachment in your email.

The manual is 0,77 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info