412910

Aastra 9133i Manual

18
Zoom out
Zoom in
Previous page
1/53
Next page
12 9133i IP Phone User Guide
Programmable Keys
Setting a "Busy Lamp Field"
(BLF) Key
The BLF feature on the IP phones
allows a specific extension to be
monitored for state changes. BLF
monitors the status (busy or idle)
of extensions on the IP phone.
Note: The BLF setting is applicable to
the Asterisk server only.
Example
A Supervisor configures BLFs on
his phone for monitoring the status
of a worker’s phone use (busy or
idle). When the worker picks up
his phone to make a call, a busy
indicator on the Supervisor’s
phone shows that the worker’s
phone is in use and busy.
On the 9133i, the busy and idle
indicators are the LEDs next to
each BLF programmable key. The
LED illuminates steady to indicate
the monitored line is off-hook or
unregistered. The LED goes off
when the line is idle.
You can set BLF on the
programmable keys using the
Aastra Web UI only. BLF is not
configurable from the IP phone UI.
Note: You can also use a BLF config-
ured key to dial out.
1. Click on Operation->
Programmable Keys.
2. Select a "Hard Key 1" through
"Hard Key 7".
3. In the "Type" field, select BLF to
apply to the programmable key.
4. In the "Value" field, enter the
phone number or extension you
want to monitor.
5. In the "Line" field, select a line
for which to apply this pro-
grammed key. Valid values are 1
through 9.
6. Click to save your
changes.
7. Click on Operation->Reset.
8. In the "Restart Phone" field
click to restart the IP
phone.
Setting a "BLF List Key"
(For use with the BroadSoft
Broadworks Rel 13 or higher
platform only)
The BLF\List feature on the IP
phones is specifically designed to
support the BroadSoft Broadworks
Rel 13 Busy Lamp Field feature.
This feature allows the IP phone to
subscribe to a list of monitored
users defined through the
BroadWorks web portal.
Note: Your system administrator must
have BLF List enabled on the
BroadWorks Server. Contact
your system administrator for
more information.
In addition to monitoring the idle
and busy state, the BLF\List feature
also supports the ringing state. On
the 9133i phone, the LED lights
next to each BLF programmable
key illuminate steady to indicate
the monitored line is off-hook or
unregistered. The LED goes off
when the is idle. When the
monitored extension is ringing, the
LED flashes.
The Broadworks BLF feature is not
the same as the Broadworks
Shared Call Appearance (SCA)
feature and does not permit call
control over the monitored
extension.
Aastra Web UI
… 18 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Aastra 9133i at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Aastra 9133i in the language / languages: English as an attachment in your email.

The manual is 0,58 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info