541311

AAS Ultra Analog VA-2 Manual

41
Zoom out
Zoom in
Previous page
1/66
Next page
4.3 The FX View 41
by choosing an intermediate position. In particular when the Pan knob is in its center position, an
equal amount of signal is sent in both channels.
The output signal from the Delay module can include a mix of input signal (dry) and delayed
signal (wet). The Wet and Dry knobs are used to adjust the amplitude of each component in the
final output. The amplitude of each component is increased by turning the corresponding knob
clockwise from no signal to an amplitude of +6dB. Note that the Wet parameter is also adjustable
from the Play view.
4.3.4 Distortion
The Multi-Effect module includes three different types of distortion which are selected using the
Shape selector knob. The Warm Tube effect applies a smooth symmetrical wave shaping to the
input signal resulting in the introduction of odd harmonics in the signal. The Metal distortion is
similar to the Warm Tube effect but is slightly asymmetrical resulting in the introduction of even
and odd harmonics in the signal. The Solid State distortion applies an aggressive symmetrical
clipping to the signal thereby adding high frequency harmonics and resulting in a harsh sound.
The Drive control is a gain knob acting on the input signal. This parameter allows one to adjust
the amount of distortion introduced in the signal by controlling how rapidly the signal reaches
the non-linear portion of the distortion curve applied on the signal. In its leftmost position, the
amplitude of the input signal is reduced by -6 dB; turning this knob clockwise allows one to increase
its amplitude. Note that the Drive parameter is also adjustable from the Play view.
The Tone knob is used to adjust the color of the signal after the distortion algorithm has been
applied. In its leftmost position, high frequencies are attenuated in the signal while in its rightmost
position low frequencies are filtered out from the signal. In its center position, the signal is left
unchanged.
The Volume knob is a gain knob acting on the amplitude of the distorted signal. Finally, the Mix
knob allows one to control the amount of dry and wet (distorted) signal in the final output signal
from the Distortion module. In its leftmost position, there is only dry signal in the output while
in its rightmost position one only hears the distorted signal. In its center position, there is an equal
amount of dry and wet signal in the output.
4.3.5 Chorus
The chorus effect is used to make a source sound like many similar sources played in unison. It
simulates the slight variations in timing and pitch of different performers executing the same part.
… 41 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for AAS Ultra Analog VA-2 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of AAS Ultra Analog VA-2 in the language / languages: English as an attachment in your email.

The manual is 3,38 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info