Manual AAS Ultra Analog VA-2 (page 22 of 66) (English)

541311

Zoom out

Zoom in

1/66

22 Parameters

parameter knob. Turning the modulation knob to the right has the opposite effect and increases the

value of the parameter for high notes while decreasing it for low notes.

The Vel modulation knobs are used to modulate the value of a parameter depending on the

velocity signal received from the keyboard so that the value of a parameter increases as notes are

played harder on the keyboard. The position of the knob is used to adjust the amount of modulation

applied to the parameter. In its leftmost position, the modulation source is turned off and the value

of the parameter does not vary with the velocity signal from the keyboard. Turning the knob

clockwise increases the effect of the modulation signal on the value of the parameter.

Modulations using the signal from the LFO and Env modules are controlled using the LFO and

Env gain knobs respectively. The amplitude of the modulation is zero when the knob is centered.

It is increased by moving it from its middle position clockwise or anti-clockwise. When turning it

anti-clockwise, the phase of the modulating signal is inverted while it is preserved when moving it

clockwise.

4.1.5 Synchronisation

The rate of the Arpeggiator, LFO and certain effect modules can be synchronized to the clock of a

host sequencer. To do so, simply turn on the Sync switch. Synchronization values are adjusted with

the Sync Rate parameter and range from 4 whole notes (16 quarter notes) to a thirty-second note

(1/8 of a quarter note) where the duration of the whole note is determined by the host sequencer

clock. The effect can also be synced to a triplet or dotted note. To adjust this parameter, click on

the Sync Rate button and choose a rate value from the drop-down menu.

4.2 The Edit View

The Edit view is activated by clicking on the Edit button in the top part of the interface. It allows

one to go ’under the hood’ and tweak the core synthesis modules of Ultra Analog VA and therefore

to customize its tone and behavior.

The two oscillators of Ultra Analog VA appear on the left of this view. They are followed by the

two ﬁlter-ampliﬁer lines and their associated mixers. One can switch from one line to the other by

clicking on the tabs to the right of the oscillators. This reveals the main parameters of the ﬁlter and

ampliﬁer modules as well as that of the LFO module and envelope generators used as modulation

sources.

To the right of the interface one ﬁnds the detailed or expert view of each of the synthesis

modules giving access to all their parameters. One can switch to any of these modules by clicking

on the corresponding tab to the left of the modules.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of AAS Ultra Analog VA-2 in the language / languages: English as an attachment in your email.

The manual is 3,38 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

AAS Ultra Analog VA-2 Manual

Product: