541317
38
Zoom out
Zoom in
Previous page
1/53
Next page
6.2 MIDI Settings 38
To edit the MIDI link, right-click/Control-click again on the control and
choose Edit MIDI Link to open the MIDI links window. You can also use
the Edit MIDI Link command from the MIDI menu.
Click on the MIDI link you wish to modify and then on the Edit button to
launch the EDIT MIDI Link window.
Specify the MIDI controller number and MIDI channel of the physical con-
troller you wish to link to the parameter in the corresponding drop-down
menus.
You can also adjust the Minimum Value and Maximum Value of the con-
troller, which are used to limit the range of MIDI controllers. The Min-
imum Value slider is used to determine the position on the Ultra Analog
Session control which corresponds to the minimum value sent by the MIDI
controller; the Maximum Value slider determines the position which cor-
responds to the maximum value sent by the MIDI controller. The leftmost
position of the slider corresponds to the Ultra Analog Session control min-
imum position (left position for a knob) while the rightmost position of the
slider corresponds to the Ultra Analog Session control maximum position
(right position for a knob).
Note that the range of a knob can be inverted by setting the value of Maxi-
mum Value to a smaller value than that of Minimum Value.
Click on the OK button and the link appears in the list of controllers linked
to the control.
Click on the OK button again to confirm the change and to leave the MIDI
Links window.
Note that the Minimum Value and Maximum Value of a MIDI link can also
be set by right/control clicking on the corresponding control and selecting
the Set MIDI Link Minimum Value or Set MIDI Link Maximum Value
command. The value corresponding to the control position will then be saved
as the minimum or maximum value of the MIDI link.
6.2.4 Deleting MIDI Links
To remove a MIDI link, right-click/Control-click again on the control and
choose Forget MIDI Link or choose the Forget MIDI Link command from
the MIDI menu.
38


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for AAS Ultra Analog Session at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of AAS Ultra Analog Session in the language / languages: English as an attachment in your email.

The manual is 0,58 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info