Manual AAS Ultra Analog Session (page 30 of 53) (English)

541317

Zoom out

Zoom in

1/53

4.2 The Engine Module 30

4.2 The Engine Module

The Engine module is used to display the selected engine. The

different types of sounds produced by the engines have been divided

in the following categories: basses, leads, pads and poly synths.

Each of these factory preset is saved in the Engine folder appearing

in the browser. The different engines can be viewed by clicking on

the View Engines button appearing on this module. One can switch

from one engine to the other by double-clicking on the associated

icon in the browser as for any other preset appearing in the browser.

4.3 The Keyboard Module

The Keyboard module controls how the synthesizer voices

respond to the events coming from an external MIDI keyboard or

from a MIDI sequencer.

The reference pitch of the keyboard can be adjusted using

the Tune knob. When in its center position (green LED on), the

reference note of the keyboard is A4 set at 440 Hz. Turning this

knob counter-clockwise will lower the pitch of this reference note

while turning it to the clockwise will increase it. The maximum

increase or decrease of the pitch of the keyboard is one semi-tone. Note that the

Tune knob can be set directly to its center position by clicking on the green LED.

Also, tuning is treated as a globalparameter and is therefore not saved with a preset.

The keyboard can be monophonic, allowing one to play only one note at a

time, or polyphonic, allowing one the play chords. This behavior is adjusted by

switching on or off the Mono button. In Mono mode, the keyboard follows a last-

note-played priority.

A portamento effect can be added when the Keyboard module is in Mono

mode. Portamento is used to make the pitch slide between notes instead of chang-

ing by step when a new note is played. The Glide knob controls the time during

which the pitch glides between notes. The portamento effect is present only when

the keyboard is played legato, this means that portamento will only occur between

two notes if the second note is played before the ﬁrst one is released.

Note that the sustain pedal (MIDI controller number 64) is always active on the

Keyboard module.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of AAS Ultra Analog Session in the language / languages: English as an attachment in your email.

The manual is 0,58 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

AAS Ultra Analog Session Manual

Product: