541310
151
Zoom out
Zoom in
Previous page
1/177
Next page
6.92 Tube Reverb 151
termination: specifies whether the final tube is open or closed at its extremity. A value of 0
indicates that the tube is closed and a value of 1 that it is open.
Note: For more details on the filtering effect of tubes see the Tube module.
6.92 Tube Reverb
The reverb effect obtained with this module is obtained with an assemblage of
three tubes. The tubes are assumed to be connected at one of their extremities and
the sound source to be located at this connection point. Each tube of the array filters
the source according to its resonance frequencies, but, since the three are connected
together, the output of each tube is also distributed to the other tubes which results
in interesting reverb effects. This module has one input, the source signal, and its
one output is the signal that would be measured by a microphone located at the tube
connection point.
mic position
source position
l2
l3
l1
2r1
2r2
2r3
Figure 93: A reverb made out with three tubes.
Tuning the reverb
The reverberation effect obtained with the module can be tuned by adjusting the lengths and radii
of the different tubes. The longer the tube, the longer the reflection time and the smaller the radii,
the lower the absorption. Small radii will also increase the amount of high frequencies in the sound.
As a rule of the thumb, use tubes having a length similar to the size of the room or space you are
imagining.
151


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for AAS Tassman 4 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of AAS Tassman 4 in the language / languages: English as an attachment in your email.

The manual is 1,79 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info