Manual AAS Tassman 4 (page 133 of 177) (English)

541310

133

Zoom out

Zoom in

1/177

6.72 Sample & Hold 133

Figure 78: Use of RMS in Vocoder.

6.72 Sample & Hold

The Sample & Hold module performs a sample & hold function. It has two

inputs, the ﬁrst a triggering signal and the second the signal to be sampled. The

module has one output which holds the last sampled value of the second input. The

second input is sampled every time a low-to-high transition is detected in the signal

of the ﬁrst input. The level of a signal is considered to be “high” for amplitudes

above 0.75 Volts while it is considered to be “low” for values below 0.25Volts. The

signal of the ﬁrst input must drop again (below 0.25V) before it can trigger another

sample. This prevents minor variations (less than 0.5V) in the gate signal, due to

noise, from triggering a new sample. The hold button on the front panel is used to

manually sample the input signal independently of the value of the gate signal.

Typical Use

The Sample & Hold can be used with two LFOs for generating pseudo-random signals as shown in

Figure 80. One LFO acts as the trigger of the Sample & Hold module while the second generates

the signal to be sampled.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of AAS Tassman 4 in the language / languages: English as an attachment in your email.

The manual is 1,79 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

AAS Tassman 4 Manual

Product: