541310
95
Zoom out
Zoom in
Previous page
1/177
Next page
6.27 Gain, Gain 2, Gain 3, Gain 4 95
In the following example, a Flute module is controlled with a Keyboard module. The ADSR
is used to shape the driving pressure signal.
Note: For polyphonic flute-like sounds, use the Organ module.
6.27 Gain, Gain 2, Gain 3, Gain 4
The Gain, Gain 2, Gain 3 and Gain 4 knob modules have respectively one to
four inputs and one to four outputs. They are used to adjust the amplitude of a signal.
The output signal is the input signal multiplied by a constant varying between 0 and 2
(+6dB).
Typical Use
The Gain modules are used whenever the level of a signal must be adjusted.
Note: See also Slider and Volume.
6.28 Highpass1
The highpass1 module is a first order high-pass filter (-6dB/octave). Its one input is
the signal to be filtered, its one output the filtered input signal.
Tuning the filter
The cutoff frq knob tunes the cutoff frequency of the filter to the desired level.
The default value of the following parameter is set at construction
Cutoff frequency: value of the filter cutoff frequency.
6.29 Inlets (1-12)
These modules are used to define the inputs of a sub-patch so that it can be connected in another
patch. These modules have no input but between 1 and 12 outputs which are connected to inputs
in the sub-patch which you want to connect to outputs in another construction. These inputs will
correspond to the inputs of the sub-patch icon which will appear in the construction window when
later you include this sub-patch in another construction. These modules have no front panel.
95


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for AAS Tassman 4 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of AAS Tassman 4 in the language / languages: English as an attachment in your email.

The manual is 1,79 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info