541310

AAS Tassman 4 Manual

89
Zoom out
Zoom in
Previous page
1/177
Next page
6.23 Dual Gate Sequencer 89
6.23 Dual Gate Sequencer
The Dual Gate Sequencer module enables you to record two sequences of gates at the same
time. This module in itself does not produce sound but is used, usually instead of a Keyboard
module, to trig other modules such as Player or drum sounds. This module is a very complete
16-step sequencer, which means that it plays sequences or patterns of 16 notes in loop. Sequences
can be set to have 1 to 16 steps. Because each sequence represents a bar containing four quarter
notes, each step of the sequencer itself represents a sixteenth note. The module can memorize 32
different sequences between which you can switch while playing.
This module has three inputs and five outputs. the first input is a sync signal which controls
the tempo from an external source, the second is a start/stop input which will start the sequencer
when it goes form 0 to 1 volt and stop it when it goes from 1 to 0 volt. The signal can come from
another sequencer or a Keyboard. The third one is a reset input which will restart the sequence
from beginning when it goes from 0 to 1 volt. The first three outputs are the same as the inputs
(sync, start/stop, reset) and are used to control other sequencers. The fourth and fifth outputs are
gate signals which can be used as control sources to trigger other modules.
This sequencer has 2 sets of 16 gate buttons. Each has its own gate output that will generate
a square pulse of 1/8 of a quarter note for each active gate buttons. The two sets of 16 shift knobs
delay the output of their respective gate. The loop buttons are used to set the length of the pattern
from 1 to 16 steps.
Creating Patterns
To create a pattern, you must first select its location. You can select it with a combination of letters
(A, B, C, D) and numbers (1 to 8), on the front panel, giving you a total of 32 patterns. The
sequencer will loop each time a pattern ends. To make the sequencer stop at the end of a pattern,
the once button must be clicked.
The patterns can be played following 5 play modes using the mode control. Forward (FWD)
plays the pattern incrementally. Backward (BWD) plays the pattern decrementally. Pendulum
(PEND) plays the pattern forward then backward. Random 1 (RDN1) plays the pattern randomly,
the same random sequence is repeated when looping. The reset button is used to generate a new
random sequence. Random 2 (RDN2) plays the pattern randomly changing the random pattern
when looping.
… 89 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for AAS Tassman 4 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of AAS Tassman 4 in the language / languages: English as an attachment in your email.

The manual is 1,79 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info