541310

AAS Tassman 4 Manual

80
Zoom out
Zoom in
Previous page
1/177
Next page
6.14 Bowed String 80
considered to act perpendicularly to the motion of the beam. The third input is a pitch modulation
signal.
Typical Use. See Bowed Multimode module.
The default value of the following parameters is set during construction
• Length: the length, in meters, of the plate.
• Width: the width, in meters, of the plate.
• Frequency: fundamental frequency, in Hertz, of the plate when there is no pitch modulation
signal or when its value is equal to 0. Note that the fundamental frequency is independent of
the size of the plate. The software automatically calculates the physical parameters necessary
to obtain the required fundamental frequency. The default value of this parameter is 261.62
Hz which corresponds to the middle C (C3) of a piano keyboard. This setting is convenient
when controlling a Bowed Plate module with a Keyboard module.
• Decay: proportional to the decay time of the sound produced by the plate.
• Number of Modes: number of modes used to simulate the object. As the number of modes
is increased, the number of partials in the sound increases but also inevitably the calculation
load.
• Excitation point-x: x-coordinate, in meters, of bow from the lower left corner of the plate.
• Excitation point-y: y-coordinate, in meters, of bow from the lower left corner of the plate.
• Listening point-x: x-coordinate, in meters, of listening point from the lower left corner of the
plate. To obtain a proper functioning, the excitation and listening points should be the same.
• Listening point-y: y-coordinate, in meters, of listening point from the lower left corner of the
plate. To obtain a proper functioning, the excitation and listening points should be the same.
Note: For more details on this module and especially the front panel controls, see the Bowed
Multimode module.
6.14 Bowed String
The Bowed String module simulates sound production by bowed strings of different materials and
sizes. This module first calculates the modal parameters corresponding to string shaped objects
according to the value of the different parameters requested at construction time and, next, calls
the Bowed Multimode module to simulate sound production by the string. The module has one
output, the sound produced by the string, and three inputs. The first input signal is the bow velocity
in the direction of the motion. The second input signal is a force signal which is considered to act
perpendicularly to the motion of the string. The third input is a pitch modulation signal.
… 80 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for AAS Tassman 4 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of AAS Tassman 4 in the language / languages: English as an attachment in your email.

The manual is 1,79 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info