541310
72
Zoom out
Zoom in
Previous page
1/177
Next page
6.7 Bandpass2 72
Typical Use
To ensure a good signal/noise ratio and avoid distortion due to excessive loudness, the Audio Out
is often used in conjunction with a Volume and a Level.
Figure 30: Use of an Audio Out
Note: There must be an Audio Out in your patch if you want to hear you instrument. See also
Stereo Audio Out.
6.7 Bandpass2
The Bandpass2 module is a second-order band-pass filter (-6dB / octave). Its
one input is the signal to be filtered, and its one output is the filtered input signal.
Tuning the filter
The center freq knob tunes the center frequency of the filter to the desired level.
The resonance button is used to adjust the resonance of the filter around the center
frequency as shown in Figure 6. Note that as the resonance is increased, the am-
plitude of the filter response increases while the bandwidth of the filter decreases.
Typical Use
Bandpass2 filters can be used to make a parametric equalizer as in the patch of Figure 33. The
response of the resulting filter is shown in Figure 32.
The default value of the following parameters is set during construction
Center Frequency: middle frequency of the passing band.
Resonance: resonance around the center frequency.
72


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for AAS Tassman 4 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of AAS Tassman 4 in the language / languages: English as an attachment in your email.

The manual is 1,79 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info