541310
70
Zoom out
Zoom in
Previous page
1/177
Next page
6.3 After Touch 70
Typical Use
The ADSR is Typically used for generating amplitude envelopes through a VCA, or spectral en-
velopes by modulating the frequency of the filter modules. An ADSR can also be used to obtain
an auto wah wah effect as shown in Figure 95 under Vbandpass2.
Figure 28: Amplitude envelope created with ADSR
Note: See also ADAR, VADSR and VADAR modules.
6.3 After Touch
The After Touch module is used to send the after touch control from a MIDI keyboard. It has one
output, the after touch signal. It outputs a value ranging between 0 and 1 volt. This module has no
front panel.
Typical Use
The After Touch module can be used to control modulation inputs on a VCO or a VCF.
6.4 And
The And module performs an AND logic operation. The one output of this module is either 1
(true) or 0 (false) depending on the values sent to the two inputs. To deliver 1 at the output, the two
inputs must receive a value of 1 otherwise the output will deliver a value of 0. This module has no
front panel. The following table shows the output value depending on the values in the two inputs.
Input signals are considered False (0) when smaller than 0.1 Volts and True (1) when greater
than 0.1 Volts.
70


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for AAS Tassman 4 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of AAS Tassman 4 in the language / languages: English as an attachment in your email.

The manual is 1,79 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info