541310
21
Zoom out
Zoom in
Previous page
1/177
Next page
Tutorials 21
2 Tutorials
The following tutorials will teach you the basics of constructing and playing synthesizers with the
Tassman. We recommend that you build the different synthesizers from scratch as you go along
the different examples. If you have any problem, you can find the patches described in the different
tutorials in the Tutorials folder under the Instruments folder in the Tassman Browser. The Tassman
comes with many pre-constructed instruments and presets. We strongly recommend that you have
a look at the patches of these instruments for more elaborate examples.
2.1 Tutorial 1. A Simple Analog Synth
In this first example we will build a simple analog type synthesizer. You will learn to:
Select modules.
Connect modules.
Switch to the Player view.
Use modulation signals.
Delete modules and wires.
Monitor the output of an instrument.
Save an instrument.
Open the Tassman by clicking on its icon or from the Start menu. The Builder contains three
different parts. The main section of the Builder is the construction area on which you will make
your patch. The Browser at the left, contains all the folders needed in Tassman. You will find the
Imports, Instrument, Modules and Sub-patches folders.
The different modules that you can assemble appear on the left in the Browser and are listed
under the different headings of Effects, Envelopes, Filters, Generators, etc .. . Just above the con-
struction area is a help area that will give you basic information on the currently selected module.
Step 1: VCO and Audio Out
Description
We will construct what is probably the simplest synthesizer one can build. The basis of our first
synth is a VCO (Voltage Controlled Oscillator). This module is a wave generator and constitutes
the sound source in our example. To hear the output of the VCO we will connect it to an Audio
Out module, which represents the output of your sound card. This module takes the digital signal
produced by the VCO and sends it to the computer sound card so that it can be heard. It is, in fact,
necessary to have one Audio Out in any instrument you make if you want to hear it.
21


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for AAS Tassman 4 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of AAS Tassman 4 in the language / languages: English as an attachment in your email.

The manual is 1,79 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info