Manual AAS Strum Acoustic Session (page 50 of 77) (English)

541318

Zoom out

Zoom in

1/77

50 Parameters

the current bar number and current beat within this bar. When a loop is loaded in the player, it is

possible to scan the loops in the same folder using the skip forward and skip backward buttons.

The loops are scanned in alphabetical order starting from the currently loaded loop.

Once a loop has been selected, it might be necessary to modify it. A loop can rapidly be

exported to the MIDI track of a sequencer by using the Drag MIDI button. To export the loop,

click on the Drag MIDI button, then drag-and-drop the ﬁle onto a MIDI track of a sequencer.

Strum Session is supplied with a library of MIDI loops which you can use to easily start creating

a new piece. The factory setting for the default MIDI loop folder is the folder where the library

was ﬁrst copied when Strum Session was installed.

6.5.4 Strumming

The Strumming section includes parameters which are used to determine how

the strumming is performed. The Speed parameter controls how rapidly the dif-

ferent strings are played when a strum is triggered. The speed of the strum is

increased by turning the knob clockwise. This parameter can be modulated by the

keyboard velocity using the Velocity knob. When in its center position, the speed

is always that corresponding to the value of the Speed knob. Turning the velocity

knob clockwise increases the strumming speed for high keyboard velocities while

it reduces the speed for low keyboard velocities. Turning this knob below its mid-

dle position has the opposite effect; playing softly on the keyboard will increase

the strumming speed while playing hard will reduce the speed.

The Auto button is used to switch on or off the Auto-Strum mode. When this mode is on, notes

and chords will played by Strum Session as they are played on the keyboard. When Auto-Strum

mode is off, chords are recognized and voiced by Strum Session but the strings are not triggered

until strumming keys are used. For more details on how to use the strumming keys, please refer to

section 3.2. Note that, as was mentioned in section 6.5.2, when the Auto-Strum mode is on, Strum

Session introduces a delay between the time notes are played on the keyboard and a the time a

chord is actually triggered. This delay is adjusted using the Time knob from the Chord section and

is necessary in order to take into account that notes in a chord are not necessarily played perfectly

simultaneously.

The Range parameter located below the chord display is used to determine the range of strings

which will be played when a strum is triggered. The lowest and highest strings played when

triggering a chord are speciﬁed by click-dragging the cursors located at each extremities of the

display. Note that the range must contain at least one string.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of AAS Strum Acoustic Session in the language / languages: English as an attachment in your email.

The manual is 1,54 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

AAS Strum Acoustic Session Manual

Product: