541312

AAS Lounge Lizard EP-4 Manual

47
Zoom out
Zoom in
Previous page
1/55
Next page
7.2 MIDI Configuration 47
7.2.4 MIDI Program Changes
Lounge Lizard EP responds to MIDI program changes. When a program change is received, the
current program is changed to the program having the same number as that of the program change
message in the currently loaded bank.
If you do not wish Lounge Lizard to respond to MIDI program changes, open the MIDI con-
figuration window by clicking on the MIDI button and uncheck the Enable Program Changes
option.
7.2.5 MIDI Bank Changes
In general, MIDI bank numbers are coded using two signals: the LSB (least significant byte) and
MSB (most significant byte) transmitted using MIDI CC (continuous controller) number 0 and 32
respectively. The way these signals are used differs with different manufacturers.
In the case of Lounge Lizard EP, the value of the MSB signal is expected to be zero while the
value of the LSB signal represents the bank number. Banks are therefore numbered from 0 to 127
with this number corresponding to the position of a bank within the list of banks as displayed by
the Bank manager (see Section 4.3). For example, an LSB value of 0 corresponds to the first bank
in the bank list while an LSB value of 10 corresponds to the eleventh bank in the list. Note that a
bank change only becomes effective after the reception of a new MIDI program change signal.
If you do not wish Lounge Lizard EP to respond to MIDI bank changes, open the MIDI config-
uration window by clicking on the MIDI button and uncheck the Enable Bank Changes option.
7.2.6 Pitch bend
The MIDI pitch wheel allows one to vary the pitch of Lounge Lizard EP. The pitch wheel can be
moved with the mouse but it is also automatically connected to the pitch wheel signal received
from your MIDI keyboard.
The range of the pitch bend is 2 semi-tones up or down by default but can be changed. To
adjust the range of the pitch bend, open the MIDI configuration window by clicking on the MIDI
button located just below the MIDI let in the top part of the interface and use the Pitch Bend Range
drop-down list to select the range in semi-tones.
7.2.7 Modulation wheel
Lounge Lizard EP responds to MIDI modulation (MIDI controller number 1). For more details,
please refer to Section 5.4.
… 47 …


Need help? Post your question in this forum.

Forumrules
1

Forum

aas-lounge-lizard-ep-4

Reset search

  • i dont have a serial number or challenge code how do i get mine to authorize Submitted on 18-1-2023 at 12:41

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for AAS Lounge Lizard EP-4 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of AAS Lounge Lizard EP-4 in the language / languages: English as an attachment in your email.

The manual is 2,57 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info