Manual AAS Lounge Lizard EP-4 (page 32 of 55) (English)

541312

Zoom out

Zoom in

1/55

32 Parameters

The Drive control is a gain knob acting on the input signal. This parameter allows one to adjust

the amount of distortion introduced in the signal by controlling how rapidly the signal reaches

the non-linear portion of the distortion curve applied on the signal. In its leftmost position, the

amplitude of the input signal is reduced by -6 dB; turning this knob clockwise allows one to increase

its amplitude. Note that the Drive parameter is also adjustable from the Play view.

The Tone knob is used to adjust the color of the signal after the distortion algorithm has been

applied. In its leftmost position, high frequencies will be attenuated in the signal while in its

rightmost position low frequencies will be ﬁltered out from the signal. In its center position, the

signal will be left unchanged.

The Volume knob is a gain knob acting on the amplitude of the distorted signal. Finally, the Mix

knob allows one to control the amount of dry and wet (distorted) signal in the ﬁnal output signal

from the Distortion module. In its leftmost position, there is only dry signal in the output while

in its rightmost position one only hears the distorted signal. In its center position, there is an equal

amount of dry and wet signal in the output.

5.3.5 Chorus

The chorus effect is used to make a source sound like many similar sources played in unison. It

simulates the slight variations in timing and pitch of different performers executing the same part.

The effect is obtained by mixing the original signal with delayed version obtained from the output

of delay lines as shown in Figure 13. In the case of a chorus effect, the length of the delay lines must

be short in order for the delayed signals to blend with the original signal rather than be perceived as

a distinct echo. The length of the delay line can be modulated introducing a slight perceived pitch

shift between the voices.

Tuning

The amount of modulation of the length of the delay lines is adjusted using the Depth knob. In the

left position, there is no modulation and the length of the delay lines remains constant. As the knob

is turned to the right, the length of the delay line starts to oscillate by an amount which increases

as the knob is turned clockwise thereby increasing the amount by which the different voices are

detuned. The frequency of the modulation is ﬁxed with the Rate knob.

i dont have a serial number or challenge code how do i get mine to authorize Submitted on 18-1-2023 at 12:41
Reply Report abuse

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of AAS Lounge Lizard EP-4 in the language / languages: English as an attachment in your email.

The manual is 2,57 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

AAS Lounge Lizard EP-4 Manual

Product: