621594

AA-Drill 77300 Manual

17
Zoom out
Zoom in
Previous page
1/39
Next page
15
unreasonable. The manufacturer cannot be held responsible for any damage
resulting from improper, incorrect or unreasonable use.
3. SAFETY PRECAUTIONS
Environment:
a. Keep work area uncluttered and well-lit. All visitors (children especially) should
be kept out of the area.
b. Power tools should be used in dry areas only. When using tool outdoors, use
proper extension cord.
Attention:
a. Do not wear loose clothing or jewelry. They can get caught in moving parts.
b. Safety glasses should be worn when operating power tool.
c. If cutting operation is dusty, mask should be worn.
d. In changing the speed you have to turn off the switch and wait until the
machine completely stops.
e. Take off the chuck key before starting the motor.
f. Never
use your hand to hold on the object while drilling. Always screw the
object tight on the working table or use the drill press vise to prevent accident
injury.
g. Keep off your hand from the drill bit while drilling.
h. Wear protective eye goggles when operating.
Operation of tools:
a. Be sure switch is off when plugging in.
b. Use the right tool for the job. Don’t force the tool. It will only harm it and
possibly you.
c. Keep proper footing and balance at all times.
d. Keep hands away from cutting area.
e. Guards should be in place and in working order. Remove adjusting keys,
wrenches before turning on.
General guidelines:
a. Disconnect tools when not in use. Take good care of power tools to assure
safe performance.
b. Do not carry tool by cord or pull on cord to disconnect tool.
c. Use clamps or vise to hold work; it keeps both of your hands free.
d. Store tools in a dry place, well out of the reach of children.
Voltage warning:
a. Before connecting the tool to a power source (receptacle, outlet, etc.) be sure
the supplied voltage is the same as the rating on the tool itself.
b. A power source with voltage greater than that specified for the tool can result
in serious injury to the user.
c. If you’re unsure of the voltage rating, do not use tool. Also using a power
source with voltage less than that of the tool will harm the motor.
… 17 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for AA-Drill 77300 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of AA-Drill 77300 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 2,27 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info