671772
13
Zoom out
Zoom in
Previous page
1/68
Next page
Installation and Service Manual Upsilon-Series
13
5.2 Free-standinginline
A . Position the pipe work header in the required location. When using several pipe work
headers: couple the pipe work headers using the supplied gaskets, M12 (DN65) or
M16 (DN100) bolts, spring washers and nuts. Align the pipe work header(s) horizon-
tally using the adjustable feet.
B. Place the gas line in its intended recess. When using several pipe work headers:
couple the gas lines using the supplied DN50/DN65 gaskets, M12 bolts, spring
washers and nuts. Refer to gure 5.2.b.
Fastenthegaslinewiththe2specialclosetoleranceboltsM6x8x16oneach
angeofthepipeworkheader(s).Refertogure5.2.c.
C. Fit the I-columns on the ange plate using 2x bolts M8x40x70mm.
Attention:Usethecorrectholesinthecolumn!
Whenusingaleftangeplate:usetheright-handholesinthecolumn.
Whenusingaright-handangeplate:usetheleft-handholesinthecolumn.
D. Fit a mounting frame on the I-column using 3-x bolt M8x50mm. Refer to gure 5.2.e.
Attention:mountingrailatthetop.
E. Fit a mounting frame on the other I-column using 3-x bolt M8x50mm. Refer to gure
5.2.f.
If boilers also have to be tted on the other side of the I-column, then the next moun-
ting frame also has to be tted straight on it.
F. Fit the remaining I-column(s) between the mounting frames using 3x M8x50mm.
Refer to gure 5.2.f.
G. Hang the boilers on the mounting rail.
Lifttheboileronlybythespecialgripsonthebottompanel(1)andsupport
theboilerbyitsrearpanel(2).Refertogure5.2.g.
Continue with chapter 5.4
Figure 5.2.a
Figure 5.2.b
Figure 5.2.c
Figure 5.2.d
OK
Figure 5.2.e
Figure 5.2.f
Figure 5.2.g
1
1
2
2
Liftingandcarryingprecautions:
- Lift only a manageable weight, or ask for help.
- When lifting the boiler, bend the knees, and keep the back straight and feet apart.
- Do not lift and twist at the same time.
- Lift and carry the boiler close to the body.
- Wear protective clothing and gloves to protect from any sharp edges.
13


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for A.O. Smith Upsilon UB-140 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of A.O. Smith Upsilon UB-140 in the language / languages: English as an attachment in your email.

The manual is 9,91 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of A.O. Smith Upsilon UB-140

A.O. Smith Upsilon UB-140 User Manual - English - 2 pages

A.O. Smith Upsilon UB-140 User Manual - English, Dutch - 2 pages

A.O. Smith Upsilon UB-140 User Manual - Dutch - 2 pages

A.O. Smith Upsilon UB-140 Installation Guide - Dutch - 72 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info