671737
63
Zoom out
Zoom in
Previous page
1/92
Next page
11 Maintenance
The water heater needs maintenance at least once a year. The maintenance interval is
determined by the water quality, the average burning time each day and the set water
temperature.
On the operator interface, the maintenance interval can be set as a reminder. The display
shows Src when the pre-set interval has elapsed.
To determine the correct interval, A.O. Smith recommends to do a system check on both
the water and the gas side, three months after installation.
Note
Do maintenance to maintain an effective and efficient transfer of heat to the water. This
significantly increases the service life of the water heater.
Note
When needed, spare parts can be ordered. To be sure that you receive the correct spare
parts, look at the data plate for the full serial number, the water heater model, and the
used gas category. Use this information when you order the spare parts.
Do the following maintenance activities:
Performance check (see section 11.1)
Water side maintenance (see section 11.3)
Gas side maintenance (see section 11.4)
Finalization (see section 11.5).
Note
For maintenance purposes, a special gasket and mounting set can be ordered at your
supplier. This kit contains the necessary gaskets, bolts and washers. Look at the data
plate for the correct ordering information.
11.1
Performance check
Check if the performance of all components is correct:
Make sure that the water heater operates the operating cycle correctly.
Make sure that the color of the flame is blue.
If applicable, make sure that the T&P valve operates correctly.
Open the T&P valve pressure relief and make sure that water spurt out.
Warning
Hot water can come out of the T&P valve.
Make sure the pressure relief connection of the inlet security group operates
correctly.
Open this pressure relief and make sure that water spurt out.
Remove the cover from the water heater, refer to Installation (see section 8.8.1).
Make sure that the condensate drain operates correctly.
If necessary, remove any contamination.
Make sure that there are no leaks in the venting system.
Make sure the air pressure differential is correct, refer to Air pressure differential
(see section 8.9.2).
n
n
1.
2.
3.
w
4.
5.
6.
7.
8.
0312266_INNOVO_UKUK_V3.0, 2017-02-10 63
63


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for A.O. Smith Innovo IR 20-160 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of A.O. Smith Innovo IR 20-160 in the language / languages: English as an attachment in your email.

The manual is 7 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of A.O. Smith Innovo IR 20-160

A.O. Smith Innovo IR 20-160 Usermanual and installation guide - German - 92 pages

A.O. Smith Innovo IR 20-160 Usermanual and installation guide - Dutch - 92 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info