Manual A.O. Smith EQ 380 (page 19 of 28) (English)

671748

Zoom out

Zoom in

1/28

2.8 Maintenance

To ensure safe and efficient

operation of the water heater it is

recommended that it is cleaned and

serviced at least once a year by a

qualified competent person.

2.8.1 Sacrificial anode

The life cycle of the anode is

determined by the quality and the

quantity of the water flowing through

the apparatus. It is therefore

recommended that the anode be

inspected and replaced if necessary at

least once a year.

1. Close the stop cock in the cold water

supply pipe.

2. Open the nearest hot water tap in

order to allow the pressure to drop

from the water heater and the pipes.

3. Slacken the anode with a fitting

wrench.

4. Check the anode and replace it if it

has been reduced in diameter by

60% or more at any point on its

length.

5. Check for water leaks.

If it is necessary to replace the

Drawing 10 - Conversion to another gas

anode it should always be replaced by

one of the same type.

The type of anode required can be

determined on the basis of the type of

the appliance and the serial number.

2.8.2 Cleaning

1. Close the gas supply and demount

the burner after it has cooled down;

2. Disconnect the burner, pilot pipe and

thermo couple from the gas control

block (see drawing 11);

3. Remove the complete burner

assembly;

4. Clean the burner with a soft brush;

5. Check the pilot burner and clean it if

so required;

6. Check the combustion chamber, flue

tube and flue baffle and clean these

if required;

7. Re-mount in reverse order. Tighten

the thermo couple connection on the

gas control block hand tight and

tighten it further with a wrench to a

maximum of 1/4 turn as it only needs

to make contact.

After cleaning of the pilot- and main

burner the operation of these should be

checked. If necessary the burner

pressure of the main burner should be

reset.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of A.O. Smith EQ 380 in the language / languages: English as an attachment in your email.

The manual is 0,76 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of A.O. Smith EQ 380

A.O. Smith EQ 380 User Manual - German - 32 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

A.O. Smith EQ 380 Manual

Product: