671747
5
Zoom out
Zoom in
Previous page
1/28
Next page
5
1.4 Technical safety equipment
Gas control block
The water heater has been tted with
a gas control block consisting of a
thermo-electrical pilot ame safeguard,
pilot ame pressure regulator, burner
pressure regulator, a control thermostat
(adjustable between 30°C and 71°C)
and a safety thermostat (82°C). This gas
control block with its simple and secure
control respectively switches the gas
supply to the main burner on or off.
This gas control block is suitable for
gasses from the rst, second and third
gas family. The maximum inlet pressure
is 50 mbar.
Thermal Reux Safeguard
The heater is tted with a ue gas
blowback safety device. The functioning
of the safety device is based upon
the principle of the Thermal Reux
Safeguard – TRS for short – shown in
Fig.2.
This TRS can be recognized by the
copper coloured spiral that is tted to the
lower edge of the draught diverter. The
spiral is connected to a thermostat by
means of a capillary tube. The wiring of
the thermostat must be connected to the
thermocouple circuit.
6
1.2 Technical safety equipment
Gas control block
The water heater has been fitted
with a gas control block consisting of a
thermo-electrical pilot flame safeguard,
pilot flame pressure regulator, burner
pressure regulator, a control thermostat
(adjustable between 30°C and 71°C)
and a safety thermostat (82°C). This
gas control block with its simple and
secure control respectively switches
the gas supply to the main burner on or
off.
This gas control block is suitable for
gasses from the first, second and third
gas family. The maximum inlet pressure
is 50 mbar.
Thermal Reflux Safeguard
The heater is fitted with a flue gas
blowback safety device. The
functioning of the safety device is
based upon the principle of the Thermal
Reflux Safeguard – TRS for short
shown in Fig.2.
This TRS can be recognized by the
copper coloured spiral that is fitted to
the lower edge of the draught diverter.
The spiral is connected to a thermostat
by means of a capillary tube. The wiring
of the thermostat must be connected to
the thermocouple circuit.
Drawing 2 - Gas control block with T.R.S.
1) T.R.S. thermostat
2) Sensor T.R.S. thermostat
3) Thermocouple with built-in
interrupter
4) Thermocouple
5) Gas control block
6) Reset button
7) Pilot burner
8) Temperature regulator knob
1) T.R.S. thermostat
2) Sensor T.R.S. thermostat
3) Thermocouple with built-in interrupter
4) Thermocouple
5) Gas control block
6) Reset button
7) Pilot burner
8) Temperature regulator knob
Drawing 2 - Gas control block with T.R.S.
5


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for A.O. Smith EQ 280 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of A.O. Smith EQ 280 in the language / languages: English as an attachment in your email.

The manual is 0,76 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of A.O. Smith EQ 280

A.O. Smith EQ 280 User Manual - German - 32 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info