671777
35
Zoom out
Zoom in
Previous page
1/48
Next page
Installation and Service Manual Epsilon-Series
35
- Remove the burner cassette (18) from the ventilator unit;
- Check the burner cassette for wear and tear, pollution and any breakages. Clean
the burner cassette with a soft brush and vacuum cleaner. In the case of breakages,
always replace the complete burner cassette (18);
- Replace the gasket (17) between the burner (18) and upper casing (15), if required;
- Replace the gasket (16) between the upper casing (15) and exchanger, if required.
Heat exchanger
- Check the heat exchanger for contamination. Clean this if necessary with a soft
brush and a vacuum cleaner. Prevent dirt falling down into the heat exchanger.
Flushing the heat exchanger from the top down is not permitted
Retting of the components is done in reverse order.
Make sure that during retting of the clamping rods, they are put into the correct
position. They should be turned vertically.
Ignition electrode
The replacement of the electrode is only necessary when the electrode is worn o. This
can be checked by measuring the ionisation current with a multimeter (see gure 12.3.h).
The minimum ionisation current has to be greater than 4µA at full capacity.
If the viewing glass is damaged the complete electrode must be replaced.
Replacement goes as follows:
- Remove the electrical connections of the electrode;
- Press the clips on both sides of the electrode to both sides and remove the complete
electrode;
- Remove and replace the gasket;
Retting of the components is done in reverse order.
Siphon and condensate tray (see g. 12.3.f and 12.3.g)
Step 1: Siphon
- First remove the condensate cup (7);
Check this for pollution. If there is no sign of strong pollution it is not necessary to
clean the condensate tray (Go to Step 3). If there is strong pollution in the cup it is
necessary to remove and clean the condensate tray according Step 2;
- Remove the inner siphon pipe (8) which remains in the condensate tray;
- Check the O-rings of the cup as well as those from the pipe and replace if necessary;
- Clean both parts by ushing it with clean water;
- Grease the O-rings again with acid free O-ring grease to make tting easier;
- If there is a leak at the condensate cup (7) or tray (9) the complete condensate trap
unit (10) has to be replaced by Art.nr. 0310375(S);
Siphon gure 12.3.i
7
8
9
10
Measuringionisationcurrent
gure12.3.h
15
16
17
18
gure12.3.e
Position gasket
gure12.3.f
gure 12.3.g
35


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for A.O. Smith Epsilon EB 40 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of A.O. Smith Epsilon EB 40 in the language / languages: English as an attachment in your email.

The manual is 1,84 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of A.O. Smith Epsilon EB 40

A.O. Smith Epsilon EB 40 User Manual - English - 16 pages

A.O. Smith Epsilon EB 40 User Manual - Dutch - 16 pages

A.O. Smith Epsilon EB 40 Installation Guide - Dutch - 48 pages

A.O. Smith Epsilon EB 40 Installation Guide - French - 44 pages

A.O. Smith Epsilon EB 40 User Manual - French - 16 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info