671777
20
Zoom out
Zoom in
Previous page
1/48
Next page
Installation and Service Manual Epsilon-Series
20
The terminal must not be located in a place where it is likely to cause a nuisance.
For protection of combustibles, refer to IS 813 section 9.10.1. where the terminal is less
than 2m (6.6ft) above a pavement or platform to which people have access (including)
any balcony or at roof the terminal must be protected by a guard of durable material.
Contact A.O. Smith for a suitable guard.
Where a terminal is tted below a window which is hinged at the top, and where
the hinge axis is horizontal, and the window opens outwards, the terminal shall
be 1m below the bottom of the window opening.
If the boiler is to be located under stairs, a smoke alarm meeting the
requirements of I.S. 409 or equivalent must be tted.
The ue must be terminated in a place not likely to cause a nuisance.
For horizontal sections, the outlet system should always be tted on an incline (50
mm/m) sloping down towards the appliance so that no condensation water is able to
accumulate in the outlet system. The chances of icicles forming on the roof outlet is
minimised by causing the condensation water to run back towards the appliance. In the
case of horizontal outlets the inlet system should be tted on an incline sloping down
towards the outside to prevent rainwater from coming in.
The appliance produces a white wisp of condensation (plumeing). This wisp of
condensation is harmless, but can be unattractive, particularly in the case of outlets in
outside walls.
The connection for the ue gas/air intake system is from standard concentric 80/125mm.
The ue gas duct for the 80/125 is a push t connection and can be increased to 100/150
by means of an adapter tting. See table 6.7.1.a for maximum ue length.
Cutting the pipe goes as follows:
- Cut just as much from the air intake part as from the ue gas part using a hand saw;
- Take o the burrs from the cutting edge to prevent cutting the seals;
When mounting the ue gas system, pay attention to the ow direction (See gue 6.7.e).
It is not permitted to mount a system upside down and will lead to complaints.
Use a soap solvent or special grease to simplify the tting.
FlowdirectionFigure6.7.e
InstallationheightFigure6.7.d
20


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for A.O. Smith Epsilon EB 40 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of A.O. Smith Epsilon EB 40 in the language / languages: English as an attachment in your email.

The manual is 1,84 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of A.O. Smith Epsilon EB 40

A.O. Smith Epsilon EB 40 User Manual - English - 16 pages

A.O. Smith Epsilon EB 40 User Manual - Dutch - 16 pages

A.O. Smith Epsilon EB 40 Installation Guide - Dutch - 48 pages

A.O. Smith Epsilon EB 40 Installation Guide - French - 44 pages

A.O. Smith Epsilon EB 40 User Manual - French - 16 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info