503230
39
Zoom out
Zoom in
Previous page
1/74
Next page
Instruction manual BFM 39
is
11. Use the pressure gauge to read the burner pressure at nipple (8). Refer to
the gas data table (3.4.3 "Gas data").
Note
If the burner pressure is incorrect and the appliance is fitted with a blank
plate or high-low control, then you cannot adjust the pressure. In this case,
consult your installation engineer or supplier. If the appliance is indeed fitted
with a burner pressure regulator, then you can adjust the pressure.
BFM 30, 50, 80, 100
12. Remove the cap (2) from the burner pressure regulator.
13. Depending on the correction required, correct the burner pressure by turning
adjustment screw (3):
- Adjustment screw anticlockwise: burner pressure decreases.
- Adjustment screw clockwise: burner pressure increases.
BFM 120
14. Remove the cap (2) from the burner pressure regulator.
15. Depending on the correction required, correct the burner pressure by turning
adjustment screw (3) (PG) using the Allen key supplied with the appliance:
- Adjustment screw anticlockwise: burner pressure decreases.
- Adjustment screw clockwise: burner pressure increases.
Warning
Adjustment screw (Ps) adjusts the starting pressure. This need not, and
must never be adjusted from the factory preset.
16. Check the burner pressure against the value given in the gas
table (3.4.3 "Gas data").
17. If the pressure reading is not correct, repeat the burner pressure adjustment
until the correct pressure is obtained.
18. Shut down the appliance by setting the 0/1 switch to position 0.
19. Shut off the gas supply.
20. Disconnect the two pressure gauges and re-tighten the sealing screws in the
test nipples.
Note
Before starting-up the appliance, take time to fill in the warranty card
supplied with the appliance. This enables us to guarantee the quality of our
systems and further enhance our warranty procedure.
Please return this card as soon as possible. Your customer will then receive a
warranty certificate with our warranty conditions
39


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for A.O. Smith BFM100 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of A.O. Smith BFM100 in the language / languages: English as an attachment in your email.

The manual is 1,88 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of A.O. Smith BFM100

A.O. Smith BFM100 User Manual - German - 70 pages

A.O. Smith BFM100 User Manual - Dutch - 70 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info