503219
59
Zoom out
Zoom in
Previous page
1/100
Next page
Instruction manual BFC 59
gis
11 Main menu
11.1 Introduction
The
MENU
is reached by pressing the button on the
controller.
The main menu comprises:
OFF
Select this option if you wish to shut the water
heater down (10 "
Shutting down") for a brief
period, but do not wish to drain it. In this mode, the
frost protection is active. This prevents water from
freezing in the water heater.
ON
In this mode, the water heater continually
responds to the hot water
demand (11.3 "
Switching to "ON mode"").
WEEK PROGRAM
Select this option to allow the water heater to
respond to demand only during pre-programmed
periods (11.5 "
Week program"). Outside those
periods, only frost protection is active.
EXTRA PERIOD
Select this option to overrule
OFF
mode or
PROG
mode (i.e. Week program) so that a single
temporary period (11.10 "
Extra period") of heat
demand will be fulfilled.
SETTINGS
Select this option to set (11.11 "
Settings") the
language and the time. You can also use this
option to display the regulation interval
(temperature), and the ignition and working
speeds of the fan.
Note
If you fail to make any selection with the main
menu open, then after 30 seconds, the water heater
will automatically return to the mode it was previously
in.
11.2 Notation convention for menu-related
instructions
The
MENU
( ) of the controller is divided into sub-
menus. For example,
SETTINGS
is one of the
functions reached from the main menu. The menu
SETTINGS
is itself divided into sub-menus. For
example,
LANGUAGE
is a sub-menu of
SETTINGS
.
So, for example, to select menu
LANGUAGE
, this
manual employs the following convention:
• :
SETTINGS
|
LANGUAGE
Confirm with .
This means:
1. : Activate the main menu with .
2.
SETTINGS
: Using button and/or go to
SETTINGS
and confirm with .
3.
LANGUAGE
: Using button and/or go to
LANGUAGE
4. Confirm with . After pressing ,
you will have activated sub-menu
LANGUAGE
.
11.3 Switching to "ON mode"
You can switch the water heater to
ON
mode from any
operational mode, as follows:
1. :
ON
|
START OPERATION
Confirm with .
Note
Also refer to the chapter on starting the water
heater (9 "Starting the water heater").
11.4 Setting the water temperature
11.4.1 Setting the water temperature via
the SET POINT menu
The water temperature can be set to any value
between 40°C and 80°C.
Set the water temperature via:
1. :
ON
|
CHANGE SETPOINT
Confirm with .
MENU
»OFF
^ ON
È WEEK PROGRAM
EXTRA PERIOD
SETTINGS
START OPERATION
^»CHANGE SETPOINT
È Tset=65?C
59


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for A.O. Smith BFC80 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of A.O. Smith BFC80 in the language / languages: English as an attachment in your email.

The manual is 3,04 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of A.O. Smith BFC80

A.O. Smith BFC80 Usermanual and installation guide - German - 100 pages

A.O. Smith BFC80 User Manual - Dutch - 116 pages

A.O. Smith BFC80 Manual - Dutch - 2 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info