503237
80
Zoom out
Zoom in
Previous page
1/96
Next page
Performing maintenance
80 Instruction manual ADMR
15
s
6. Activate "ON mode" by going through the following steps:
- Press once on the blue arrow ( ) to position the cursor beside
ON
,
then press .
- Confirm the selection
START OPERATION
with .
7. If there is no heat demand, increase Tset (11.3 "Setting the water
temperature"). Note the original setting. Draw some hot water off to create
heat demand.
8. Check whether the heating cycle is running correctly (9.2 "The appliance's
heating cycle").
9. If you have adjusted T
set
, return it to the original value (11.3 "Setting the
water temperature").
10. Check the supply and burner pressure (3.11 "Checking the supply pressure
and burner pressure"), and adjust them if necessary.
11. Check that all components of the chimney flue system are properly attached.
12. Test the operation of the overflow valve of the protected cold supply setup.
The water should spurt out.
13. Test the overflow operation of the T&P valve. The water should spurt out.
14. Check the drainpipes from the discharge points of all valves and remove any
scale deposits that may be present.
15. Drain the appliance (6 "Draining")
.
15.3 Water-side
maintenance
15.3.1 Introduction
The following steps must be carried out on the water side:
1. Checking the anodes
.
2. Descaling and cleaning the tank
.
15.3.2 Checking the anodes
Timely replacement of the anodes extends the service life of the appliance. The
appliance's anodes must be replaced as soon as they are 60% or more used up
(take this into consideration when determining the maintenance frequency).
Warning
The draught diverter and cover can be hot.
1. Detach the wiring from the flue damper.
2. Withdraw the sensor cable plug from the flue gas sensor.
3. Detach the fastening brackets from the flue gas sensor.
MENU
»OFF
^ ON
È WEEK PROGRAM
»START OPERATION
^ CHANGE SETPOINT
È Tset=65ÉC
80


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for A.O. Smith ADMR115 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of A.O. Smith ADMR115 in the language / languages: English as an attachment in your email.

The manual is 2,5 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of A.O. Smith ADMR115

A.O. Smith ADMR115 User Manual - Dutch - 104 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info