461183

A-solar AM-106 Sun Traveler Manual

2
Zoom out
Zoom in
Previous page
1/2
Next page

 
This is the process to charge the solar panel. First,
open the two wings and keep the solar panel side
facing in the sunlight. The display will show out
“Solar Charge OK”. It means the Li-ion battery is
being charged. When the battery is fully charged,
the display will stop automatically. If the panel is not
face to the sunlight, the display will be powered off,
the solar panel will stop working.
 
This is the process to charge the battery inside.
Plug the charging cable into the small
USB socket of the charger and connect into the
laptop or PC USB socket.
Plug the build in USB into the laptop
or PC USB socket. The display will show out
“SystemChecking” and the information of the power
remain in the charger. Please pull out the plug when
display show out the “Batt 100%“
 
This is the process to charge digital devices For
instance, select correct voltage (cell phone is
usually 5.5V), plug the USB cable in the charger,
then connect the cable with your cell phone. (Select
the suitable adaptor )The Display will turn on and
show our how many amp power charging into your
device, that means the charger is at work.
After about 1-2 hours, the display will stop
automatically , that means the charger is out of
power and the charging process is nished. Please
pull out the USB cable from the charger, you have to
charge in the sun or with the USB charging cable. In
addition, you also can open the cover in the sun to
charge the Li-ion battery and the cell phone at the
same time.

1. Please always pay attention to the display message.
2. It is not quality problem, if it has terminated its
unstable output in order to protect your device.
3. You can continue to charge your device only after
several hours charging to the solar.
4. Never charge the device via mini-USB port while
using the external USB port at the same time.




“Bat.checking” will ashing 25
time, after that it will show out
the power remain in the charger.






Battery: Lithium 3.7V - 1100mAh
Dimensions: 14.5 x 6.8 x 35mm
Weight: 150 grams

1. Solar Charger connectors
2. Cell Phone adapters:
Nokia (2x)
Samsung (2x)
Sony Ericsson
Mini USB
Micro USB
NDS Lite
Female USB
LG
iPod & iPhone (with own cable)
Sony PSP
3. AC-DC adapter
4. USB charging + connecting cable included

1. Solar Panel (Mono crystalline) :3V 120mA
2. Charging time for the cell phone: 1-2 hours
3. Charging time for the Li-ion battery using adapter:
2-3 hours
4. Charging time for the Li-ion battery using solar
panel: 12hours














Ut ate vulla augait numsan ut augue magna cor augait
nullumsan enisi. Im vulluptat. Exer ipis euisl dunt
praesto er augiam ex exercil iquam, sit lobore mod
tet do etummy num dolobor ipsummolum diam, conse
faccum ver aliquat, quis ea feugiamet nulla faccum ing
eui eugait prat ip enisi.


 
This is the process to charge the solar panel. First,
open the two wings and keep the solar panel side
facing in the sunlight. The display will show out
“Solar Charge OK”, It means the Li-ion battery is
being charged. When the battery is fully charged,
the display will stop automatically. If the panel is not
face to the sunlight, the display will be powered off,
the solar panel will stop working.
 
This is the process to charge the battery inside.
Plug the charging cable into the small
USB socket of the charger and connect into the
laptop or PC USB socket.
Plug the build in USB into the laptop
or PC USB socket. The display will show out
“SystemChecking” and the information of the power
remain in the charger. Please pull out the plug when
display show out the “Batt 100%“
 
This is the process to charge digital devices For
instance, select correct voltage (cell phone is
usually 5.5V), plug the USB cable in the charger,
then connect the cable with your cell phone. (Select
the suitable adaptor )The Display will turn on and
show our how many amp power charging into your
device, that means the charger is at work.
After about 1~2 hours, the display will stop
automatically , that means the charger is out of
power and the charging process is nished. Please
pull out the USB cable from the charger, you have to
charge in the sun or with the USB charging cable. In
addition, you also can open the cover in the sun to
charge the Li-ion battery and the cell phone at the
same time.

1. Please always pay attention to the display message.
2. It is not quality problem, if it has terminated its
unstable output in order to protect your device.
3. You can continue to charge your device only after
several hours charging to the solar.
4. Never charge the device via mini-USB port while
usingthe external USB port at the same time

 
This is the process to charge the solar panel. First,
open the two wings and keep the solar panel side
facing in the sunlight. The display will show out
“Solar Charge OK”, It means the Li-ion battery is
being charged. When the battery is fully charged,
the display will stop automatically. If the panel is not
face to the sunlight, the display will be powered off,
the solar panel will stop working.
 
This is the process to charge the battery inside.
Plug the charging cable into the small
USB socket of the charger and connect into the
laptop or PC USB socket.
Plug the build in USB into the laptop
or PC USB socket. The display will show out
“SystemChecking” and the information of the power
remain in the charger. Please pull out the plug when
display show out the “Batt 100%“
 
This is the process to charge digital devices For
instance, select correct voltage (cell phone is
usually 5.5V), plug the USB cable in the charger,
then connect the cable with your cell phone. (Select
the suitable adaptor )The Display will turn on and
show our how many amp power charging into your
device, that means the charger is at work.
After about 1~2 hours, the display will stop
automatically , that means the charger is out of
power and the charging process is nished. Please
pull out the USB cable from the charger, you have to
charge in the sun or with the USB charging cable. In
addition, you also can open the cover in the sun to
charge the Li-ion battery and the cell phone at the
same time.

1. Please always pay attention to the display message.
2. It is not quality problem, if it has terminated its
unstable output in order to protect your device.
3. You can continue to charge your device only after
several hours charging to the solar.
4. Never charge the device via mini-USB port while
usingthe external USB port at the same time

 
This is the process to charge the solar panel. First,
open the two wings and keep the solar panel side
facing in the sunlight. The display will show out
“Solar Charge OK”, It means the Li-ion battery is
being charged. When the battery is fully charged,
the display will stop automatically. If the panel is not
face to the sunlight, the display will be powered off,
the solar panel will stop working.
 
This is the process to charge the battery inside.
Plug the charging cable into the small
USB socket of the charger and connect into the
laptop or PC USB socket.
Plug the build in USB into the laptop
or PC USB socket. The display will show out
“SystemChecking” and the information of the power
remain in the charger. Please pull out the plug when
display show out the “Batt 100%“
 
This is the process to charge digital devices For
instance, select correct voltage (cell phone is
usually 5.5V), plug the USB cable in the charger,
then connect the cable with your cell phone. (Select
the suitable adaptor )The Display will turn on and
show our how many amp power charging into your
device, that means the charger is at work.
After about 1~2 hours, the display will stop
automatically , that means the charger is out of
power and the charging process is nished. Please
pull out the USB cable from the charger, you have to
charge in the sun or with the USB charging cable. In
addition, you also can open the cover in the sun to
charge the Li-ion battery and the cell phone at the
same time.

1. Please always pay attention to the display message.
2. It is not quality problem, if it has terminated its
unstable output in order to protect your device.
3. You can continue to charge your device only after
several hours charging to the solar.
4. Never charge the device via mini-USB port while
usingthe external USB port at the same time
Solar
chrg OK
Bat.
checking
Bat.
checking
Batt 100%
USB Out
XXXmA
AM-106
power everywhere


2


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for A-solar AM-106 Sun Traveler at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of A-solar AM-106 Sun Traveler in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 0,83 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info