Manual 4G Systems XSJack T3e (page 8 of 33) (English)

566837

Zoom out

Zoom in

1/33

Step 3: Connecting a telephone, a fax machine, or

both

Telephone or fax machine:

Connect one end of your RJ-11

telephone cable to the telephone

or fax machine and the other end

into the RJ-11 jack of the

XSJackT3. If you want to use the

XSJackT3 for fax only, it is

nevertheless recommended to

carry out this initial setup proce-

dure with a telephone, as it could

be difficult to enter the required service codes on a fax machine due to

the absence of a telephone receiver or dedicated button to go off hook.

If you do not have an analogue telephone available, refer to page 10.

Telephone and fax machine:

If both a telephone and a fax

machine are to be connected, first

connect the fax machine to the

XSJackT3 as described above.

Afterwards, connect the telephone

to an available RJ-11 jack of the fax

machine. You may want to refer to

the fax machine's user manual for

more information. Please note that

in certain countries the fax machi-

nes may not have this option. In these cases, a country specific adap-

ter cable is needed.

Note: All connected end devices must support dual tone multiple fre-

quency dialling (DTMF). Modems for data connections cannot be

connected to the XSJackT3.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of 4G Systems XSJack T3e in the language / languages: English as an attachment in your email.

The manual is 0,46 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of 4G Systems XSJack T3e

4G Systems XSJack T3e User Manual - English, German - 72 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

4G Systems XSJack T3e Manual

Product: