654576
61
Zoom out
Zoom in
Previous page
1/71
Next page
61
1.
Turn the projector off, and unplug the power cord. Allow the
projector to cool suf ciently.
2.
After making sure that the projector has cooled adequately,
slowly turn over the projector, so that the bottom is facing.
3.
Remove the battery cover.
Turn the battery cover in the direction indicated “OPEN”
using such as coins. Then the battery cover will come up. While
removing the battery cover, pick its knob.
4.
Take the old battery out.
Press the metal claw of the battery holder. Then the battery
will come up. Remove the battery.
5.
Put a new battery in.
Replace battery with HITACHI MAXELL, Part No.CR2032
only. Use of another battery may present a risk of re or
explosion.
Insert a new battery in the battery holder according to its minus terminal
as indicated in the battery holder, so that the side marked by
+
is
facing. And push the battery into the battery holder fully to x.
6.
Close the battery cover.
Replace the battery cover in place, then turn it in the
direction indicated “CLOSE” using such as coins, to x.
%.15'
AU
D
I
O
IN
3
AU
D
I
O
IN
2
C
B
/P
B
C
R
/P
R
A
U
D
I
O
I
N
1
R
G
B
I
N
1
R
G
B
IN
2
S
D
C
A
R
D
A
U
X
I
/
O
D
C
5
V
0
.
5
A
L
A
N
C
O
N
T
R
O
L
R
G
B
O
U
T
A
U
D
I
O
O
U
T
U
S
B
V
I
D
E
O
Y
S
-
V
ID
E
O
CLOSE
OPEN
Battery Cover
12'0
Knob
Metal claw
“+” marking
Maintenance
WARNING
Always handle the batteries with care and use them only as directed. Battery
may explode if mistreated. Do not recharge, disassemble or dispose of in re.
And also improper use may result in cracking or leakage, which could result in re, injury and/or
pollution of the surrounding environment.
Be sure to use only the batteries speci ed. Do not use batteries of different types at the same
time. Do not mix a new battery with used one.
Make sure the plus and minus terminals are correctly aligned when loading a battery.
If the battery is placed in the battery holder upside-down, it may be hard to remove.
Keep a battery away from children and pets. If swallowed consult a physician immediately for emergency treatment.
Do not short circuit or solder a battery.
Do not allow a battery in a re or water. Keep batteries in a dark, cool and dry place.
If you observe a leakage of a battery, wipe out the ower and then replace a battery. If the liquid
adheres to your body or clothes, rinse well with water immediately.
Obey the local laws on disposing the battery.
Replacing Internal Clock battery
Consumption of the battery makes the clock not to work correctly. When the clock is wrong or it has
stopped, please replace the battery according to the following procedures.
NOTE
The internal clock’s time will be reset when the battery is removed.
Please recon gure the time via the menu or a web browser after replacing the battery.
(Please refer to
54
and User’s Manual-Network Functions: Date/Time Settings for more information.)
If the battery is placed in the battery holder upside-down, follow the procedure below to remove
and reload it properly.
1. Remove the battery cover as described in steps 1 through 3 above.
2. Turn the projector over again, so that the top of the projector is facing up.
3. While lifting the side of the projector closest to the lens, press the metal claw of the battery
holder. The battery will fall out of the holder, so be careful not to lose it.
4. Turn the projector over once more, so that the bottom faces up, and reload the battery correctly.
61


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for 3m X62w at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of 3m X62w in the language / languages: English as an attachment in your email.

The manual is 6,41 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of 3m X62w

3m X62w User Manual - German - 71 pages

3m X62w User Manual - French - 71 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info