Manual 3m X56 (page 98 of 104) (English)

654575

Zoom out

Zoom in

1/104

3M™ Digital Projector X56

Troubleshooting

Regarding the indicator lamps (continued)

• When the interior portion has become overheated, for safety purposes,

the projector is automatically shut down, and the indicator lamps may also be

turned off. In such a case, disconnect the power cord, and wait at least 45 minutes.

After the projector has suf ciently cooled down, please check the lamp connection

and lamp door, and then turn the power on again.

NOTE

POWER

indicator

LAMP

indicator

TEMP

indicator

Description

Blinking

In Red

Lighting

In Red

Turned

off

Lighting

In Red

There is a possibility that the interior portion

has become heated.

Please turn the power off, and allow the projector to cool down at least

20 minutes. After the projector has suf ciently cooled down, please make

con rmation of the following items, and then turn the power on again.

• Is there blockage of the air passage aperture?

• Is the air  lter dirty?

• Does the peripheral temperature exceed 35°C?

• Is the setting for FAN SPEED appropriate?

For details on FAN SPEED, refer to FAN SPEED of SERVICE in the

OPTION menu (



59). If the projector is used with a wrong setting,

it may cause damage to the projector itself or the parts inside.

Lighting

In Green

Simultaneous

blinking in Red

It is time to clean the air  lter.

Please immediately turn the power off, and clean or change the

air  lter referring to the section Cleaning and replacing the air

 lter. After cleaning or changing the air  lter, please be sure to

reset the  lter timer.

Lighting

In Green

Alternative

blinking in Red

There is a possibility that the interior portion

has become overcooled.

Please use the unit within the usage temperature

parameters (5°C to 35°C).

Blinking In

Green for

approx. 3

seconds.

Turned

off

Turned

off

At least 1 Power ON schedule is saved to the

projector.

Please refer to 3.7 Schedule Settings in the Network

Guide.

Shutting the projector down

Only when the projector can not be turned off by usual

procedure (

18), please push the shutdown switch using

a pin or similar, and disconnect the power plug from the

power outlet. Before turning it on again, wait at least 10

minutes to make the projector cool down enough.

Resetting all settings

When it is hard to correct some wrong settings, the FACTORY RESET function of

SERVICE item in OPTION menu (

63) can reset all settings (except settings such

as LANGUAGE, LAMP TIME, FILTER TIME, FILTER MESSAGE, SECURITY and

NETWORK) to the factory default.

Shutdown switch

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of 3m X56 in the language / languages: English as an attachment in your email.

The manual is 9,11 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

3m X56 Manual

Product: