5615
39
Zoom out
Zoom in
Previous page
1/52
Next page
S50/X50
Digital Projector
Operator's Guide
© 3M 2003 3M™ Digital Projector S/X50
USING THE MAGNIFY FEATURE ... 21
ACCESSORIES .............................. 39
Page
PROJECTOR FEATURES............... 2
PREPARATIONS ............................. 2
PART NAMES.................................. 4
SETTING UP THE PROJECTOR .... 6
CONNECTING YOUR DEVICES ..... 8
USING
THE REMOTE CONTROL ........... 13
TURNING ON THE POWER .......... 14
TURNING OFF THE POWER ........ 16
ADJUSTING THE VOLUME ........... 17
TEMPORARILY
MUTING THE SOUND ................... 17
ADJUSTING THE POSITION ........ 18
USING THE AUTOMATIC
ADJUSTMENT FEATURE ........... 19
CORRECTING
KEYSTONE DISTORTIONS ......... 20
Page
FREEZING THE SCREEN ............. 21
SIGNAL SEARCHING ................... 22
SELECTING
THE ASPECT RATIO ..................... 22
TEMPORARILY
BLANKING THE SCREEN .......... 22
USING THE MENU FUNCTIONS .. 23
MULTIFUNCTIONAL
SETTINGS .................................... 24
THE LAMP ..................................... 30
THE AIR FILTER ............................ 32
OTHER CARE ................................ 34
WHAT TO DO
WHEN YOU THINK A MACHINE
DEFECT HAS OCCURRED ......... 35
SPECIFICATIONS .......................... 38
1
OPERATING THE PC SCREEN .... 29
CONTENTS
Thank you for purchasing this projector.
• The information in this manual is subject to change without notice.
• The manufacturer assumes no responsibility for any errors that may appear in this manual
The reproduction, transmission or use of this document or contents is not permitted without express
written authority.
TRADEMARK ACKNOWLEDGEMENT :
• PS/2, VGA and XGA are registered trademarks of the International Business Machines Corporation.
• Apple, Mac and ADB are registered trademarks of Apple Computer, Inc.
• VESA and SVGA are trademarks of the Video Electronics Standard Association.
• Windows is a registered trademark of Microsoft Corporation.
• All other trademarks are the property of their respective owners.
NOTE
CP-S317/327W/最終 03.5.27 2:22 PM ページ 1
S50/X50 Digital Projector
Operator's Guide
Please read the "Product Safety Guide" and this "Operator's Guide"
thoroughly to ensure correct usage through understanding.
After reading, store this instruction manual in a safe place for future reference.
CAUTION
© 3M 2003. 3M™ Digital Projector S/X50
2
Ultra High Brightness
Crisp, ultra-bright presentations is achieved
by using a UHB (ultra high brightness) lamp
and a highly efficient optical system
Partial Magnification Function
Interesting parts of images can be magnified
for closer viewing
Keystone Distortion Correction
Quick correction of distorted images electrically
Whisper Mode Equipped
Special mode is available for reducing
projector noise to achieve quieter operation
PREPARATIONS
Your projector should come with the items
shown below. Check to make sure that all the
items are included. Contact your dealer if
anything is missing.
Projector
Soft case
Power cord
(US Type)
Power cord
(UK Type)
Power cord
(Europe Type)
RGB cable
VIDEO
ASPECT
HOME
END
MUTE
PAGE DOWN
KEYSTONEFREEZE
OFF
ON
MENUPOSITION
ENTER
ESC RESET
PAGE UP VOLUME
MAGNIFY
AUTO BLANK
RGB SEARCH
STANDBY/ON
Remote control
Two AA batteries
(for the remote
control)
Video/Audio Componet Video
PROJECTOR
FEATURES
This liquid crystal projector is used to project
various computer signals as well as NTSC / PAL /
SECAM video signals onto a screen. Little space
is required for installation and large images can
easily be realized.
Keep the original packing material for future reshipment.
NOTE
CP-S317/327W/最終 03.5.27 2:22 PM ページ 2
Product Safety Guide
Warranty
Quick Start Guide
Operator's Guide
USB mouse
cable
cable cable
(with white lead) (with green lead)
S50/X50
Multimedia Projector
Operator's Guide
S50/X50 Projecteur multimedia - Guide de L' opérateur
S50/X50 Multimedia-Projektor - Benutzerhandbuch
S50/X50 Proyector de Multimedia - Guía del usuario
S50/X50 Proiettore Multimediale - Guida dell' operatore
S50/X50 Multimedia Projector - Gebruiksaanwijzing
S50/X50 Projector dos Multimedia - Guia da operador
S50/X50 Multimedia Projektør- Brukerhåndbok
© 3M 2003. 3M™ Digital Projector S/X50
3
1
Connect your devices to the projector
Connect your computer, VCR and/or other
devices you will be using to the projector.
Insert the batteries into the remote
control
2
13
3
Connect the power cord
(1)
Connect the connector of the electrical power cord to the AC inlet of the main unit.
(2) Firmly plug the power cord's plug into the outlet
WARNING Precautions to observe in regards to the power cord: Please use extra
caution when connecting the projector's power cord as incorrect or faulty
connections may result in FIRE AND/OR ELECTRICAL SHOCK. Please adhere to the
following safety guidelines to insure safe operation of the projector:
Only plug the power cord into outlets rated for use with the power cord's specified voltage range.
Only use the power cord that came with the projector.
NEVER ATTEMPT TO DEFEAT THE GROUND CONNECTION OF THE THREE-
PRONGED PLUG!
Make sure that you firmly connect the power cord to the projector and wall outlet.
8 12
(1)
(2)
Power outlet
Power cordAC inlet
CP-S317/327W/最終 03.5.27 2:22 PM ページ 3
© 3M 2003. 3M™ Digital Projector S/X50
4
PART NAMES
THE PROJECTOR
Zoom ring
Air filter
keystone button
video button
reset button
menu button
power indicator
lamp indicator
Indicates the corresponding
reference page
AC power inlet
s-video in port
rgb in 1 port
video in port
usb port
Power switch
cursor buttons
Remote sensor
Remote sensor
CP-S317/327W/最終 03.5.27 2:22 PM ページ 4
component video
component video
component video
CR/PR port
11
11
11
CB/PB port
Y port
11
coontrol port
10
10
11
rgb in 2 port
10
audio in L port
10
rgb out port
12
10
Elevator button
Terminal panel
31
32
14
6
15
15
32
6
rgb button
20
23
29
15
15
14
13
13
23
14
3
6
,,,
Lens
on/off button
Rear adjuster foot
Speaker
10
audio in R port
temp indicator
Elavator foot
© 3M 2003. 3M™ Digital Projector S/X50
5
THE REMOTE CONTROL
STANDBY/ON button
14
VIDEO button
15
MENU button
23
RGB button
15
BLANK button
22
SEARCH button
22
VOLUME button
17
MUTE button
17
KEYSTONE button
20
ASPECT button
22
AUTO button
19
MAGNIFY buttons
21
KEYBOARD buttons
FREEZE button
21
POSITION button
18
ESC button
23
,,,
Cursor buttons
23
RESET button
ENTER button
23
VIDEO
ASPECT
HOME
END
MUTE
PAGE DOWN
KEYSTONEFREEZE
OFF
ON
MENUPOSITION
ENTER
ESC RESET
PAGE UP VOLUME
MAGNIFY
AUTO BLANK
RGB SEARCH
STANDBY/ON
CP-S317/327W/最終 03.5.27 2:22 PM ページ 5
2
9
2
9
© 3M 2003. 3M™ Digital Projector S/X50
6
Adjusting the Projector's Elevator Foot
1
Press and hold in the elevator
button
2
Raise or lower the projector to the
desired height and then release the
elevator button
When you release the elevator button, the elevator
foot will lock into position.
3
As necessary, you can also finely
adjust the left-right slope of the
projector by twisting the rear foot
You can use the elevator foot to make adjustments if the surface on which you
need to set the projector is uneven or if you otherwise need to adjust the angle of
projection. The adjustment range of the elevator foot is 0 to 9 degrees.
CAUTION
Install the projector in a suitable environment according to instructions
of the "Product Safety Guide" and this "Operator's Guide".
If you press the elevator button without holding the projector, the projector might
crash down, overturn, smash your fingers and possibly result in malfunction. To
prevent damaging the projector and injuring yourself, ALWAYS HOLD THE
PROJECTOR whenever using the elevator button to adjust the elevator foot.
SETTING UP THE PROJECTOR
CP-S317/327W/最終 03.5.27 2:22 PM ページ 6
9
Rear Foot Adjuster
adjuster screw by hand
© 3M 2003. 3M™ Digital Projector S/X50
7
Refer to the illustrations and tables below to determine the screen size and
projection distance.
Adjusting the Screen Size and Projection Distance
Top view
a
c
b
Lens center
The screen
Side view
Top view
a
c
b
Lens center
The screen
Side view
If 4:3 aspect ratio
If 16:9 aspect ratio
4
3
9
16
The values shown in the table are calculated for a full size screen
(S50: 800x600 pixels/X50: 1024x768 pixels).
a:Distance from the projector to the screen (±10%)
b:Distance from the lens center to the bottom of the screen (±10%)
c:Distance from the lens center to the top of the screen (±10%)
Screen Size [inch (m)]
a [inch (m)]
b
[inch (cm)]
c
[inch (cm)]
Min. Max.
30 (0.8) 35 (0.9) 42 (1.1) 1 (2) 17 (44)
40 (1.0) 47 (1.2) 56 (1.4) 1 (3) 23 (58)
50 (1.3) 59 (1.5) 71 (1.8) 1 (4) 29 (73)
60 (1.5) 71 (1.8) 85 (2.2) 2 (4) 34 (87)
70 (1.8) 83 (2.1)
100 (2.5)
2 (5) 40 (102)
80 (2.0) 95 (2.4)
114 (2.9)
2 (6) 46 (116)
90 (2.3)
107 (2.7) 129 (3.3)
3 (7) 51 (131)
100 (2.5)
119 (3.0) 143 (3.6)
3 (7) 57 (145)
120 (3.0)
143 (3.6) 172 (4.4)
3 (9) 69 (174)
150 (3.8)
180 (4.6) 216 (5.5)
4 (11) 86 (218)
200 (5.0)
240 (6.1) 288 (7.3)
6 (15)
114 (290)
250 (6.3)
300 (7.6) 361 (9.2)
7 (18)
143 (363)
300 (7.5)
360 (9.2)
433 (11.0)
9 (22)
171 (435)
Screen Size [inch (m)]
a [inch (m)]
b
[inch (cm)]
c
[inch (cm)]
Min. Max.
30 (0.8) 38 (1.0) 46 (1.2) 2 (4) 16 (41)
40 (1.0) 51 (1.3) 61 (1.6) 2 (5) 22 (55)
50 (1.3) 64 (1.6) 77 (2.0) 3 (6) 27 (69)
60 (1.5) 77 (2.0) 93 (2.4) 3 (8) 32 (82)
70 (1.8) 90 (2.3)
109 (2.8)
4 (9) 38 (96)
80 (2.0)
104 (2.6) 125 (3.2)
4 (10) 43 (110)
90 (2.3)
117 (3.0) 140 (3.6)
5 (12) 49 (124)
100 (2.5)
130 (3.3) 156 (4.0)
5 (13) 54 (137)
120 (3.0)
156 (4.0) 188 (4.8)
6 (15) 65 (165)
150 (3.8)
196 (5.0) 235 (6.0)
8 (19) 81 (206)
200 (5.0)
261 (6.6) 314 (8.0)
10 (26)
108 (275)
250 (6.3)
327 (8.3)
393 (10.0)
13 (32)
135 (343)
300 (7.5)
393 (10.0)
472 (12.0)
15 (39)
162 (412)
CP-S317/327W/最終 03.5.27 2:22 PM ページ 7
© 3M 2003. 3M™ Digital Projector S/X50
8
Display monitors
12
DVD players
11
VCRs
11
Laptop computers
10
Desktop computers
10
Indicates the
corresponding
reference page
ATTENTION
Precautions to observe when connecting other devices to the projector
Whenever attempting to connect other devices to the projector, please thoroughly
read the manual of each device to be connected.
TURN OFF ALL DEVICES prior to connecting them to the projector. Attempting to
connect a live device to the projector may generate extremely loud noises or other
abnormalities that may result in malfunction and/or damage to the device and/or
projector. Refer to the TECHNICAL for the pin assignment of connectors and
RS-232C communication data.
Make sure that you connect devices to the correct port. Incorrect connection may
result in malfunction and/or damage to the device and/or projector.
A component cable and some other cables have to be used with core set. Use the
accessory cable or a designated-type cable for the connection. For cables that have
a core only at one end, connect the core to the projector.
Secure the screws on the connectors and tighten.
CONNECTING YOUR DEVICES
Devices You Can Connect to the Projector
(Refer to this section for planning your device
configuration to use for your presentation.)
CAUTION Incorrect connecting could result in fire or electrical shock. Please
read the "Product Safety Guide" and this "Operator's Guide".
CP-S317/327W/最終 03.5.27 2:22 PM ページ 8
© 3M 2003. 3M™ Digital Projector S/X50
9
Ports and Cables
Refer to the table below to find out which projector port and cable to use for connecting a
given device. Use this table for determining which cables to prepare.
About Plug-and-Play Capability
This projector is compatible with VESA DDC 1/2B. Plug-and-Play can be achieved by
connecting this projector to computers that are VESA DDC (display data channel)
compatible. Please take advantage of this function by connecting the accessory RGB
cable to the rgb in 1 port (DDC 1/2B compatible). Plug-and-Play may not work
properly if any other type of connection is attempted.
Plug-and-Play is a system composed of the computer, its operating system and
peripheral equipment (i.e. display devices).
Please use the standard drivers as this projector is a Plug-and-Play monitor.
Plug-and-Play may not function properly with some type of computers. Use the rgb in 2
port if Plug-and-Play does not function correctly.
NOTE
Function Projector Port Connection Cables
RGB input
rgb in 1
Accessory RGB cable or optional RGB
cable with D-sub 15-pin shrink jack and
inch thread screws
rgb in 2
RGB output rgb out
USB mouse control usb Accessory USB cable
PS/2 mouse control
control
Optional PS/2 mouse cable
ADB mouse control Optional ADB mouse cable
Serial mouse control Optional serial mouse cable
RS-232C communication Optional RS-232C cable
S-video input s-video in
Optional S-video cable with mini DIN 4-pin
jack
Video input video in Accessory audio/video cable
Component video input
component video Y
Optional component video cablecomponent video C
B
/P
B
component video C
R
/P
R
Audio input
audio in L
Accessory audio/video cable or optional
audio cable with RCA jack
audio in R
CP-S317/327W/最終 03.5.27 2:22 PM ページ 9
© 3M 2003. 3M™ Digital Projector S/X50
19
The automatic adjustment operation requires approximately 10 seconds. Also, please
note that it may not function correctly with some input signals.
NOTE
1
USING THE AUTOMATIC ADJUSTMENT FEATURE
Press the AUTO button
Horizontal position (H. POSIT), vertical position (V.
POSIT), clock phase (H. PHASE) and horizontal size (H.
SIZE) are automatically adjusted.
Make sure that the application window is set to its
maximum size prior to attempting to use this feature.
Dark pictures may still be incorrectly adjusted. Use a
bright screen when adjusting.
The signal type best suited for the respective input
signal is selected automatically.
This feature is available only if VIDEO is set to AUTO in
the INPUT menu.
Automatic Adjustment for RGB Input
Automatic Adjustment for Video Input
VIDEO
ASPECT
HOME
END
MUTE
PAGE DOWN
KEYSTONEFREEZE
OFF
ON
MENUPOSITION
ENTER
ESC RESET
PAGE UP VOLUME
MAGNIFY
AUTO BLANK
RGB SEARCH
STANDBY/ON
AUTO
CP-S317/327W/最終 03.5.27 2:22 PM ページ 19
© 3M 2003. 3M™ Digital Projector S/X50
20
This function may not be work well with some types of input signals.
The adjustable range for correcting keystone distortions will vary with the type of
input signal.
NOTE
CORRECTING KEYSTONE DISTORTIONS
1
Press the KEYSTONE button
As illustrated on the right, a dialog will appear
on the screen to aid you in correcting the
distortion.
2
Use the , buttons to select the
direction of distortion to correct ( / )
3
Use the , buttons to correct the
distortion
Press the KEYSTONE button again to close the dialog and
complete this operation. (Even if you don't do anything, the
dialog will automatically disappear after a few seconds.)
VIDEO
ASPECT
HOME
END
MUTE
PAGE DOWN
KEYSTONEFREEZE
OFF
ON
MENUPOSITION
ENTER
ESC RESET
PAGE UP VOLUME
MAGNIFY
AUTO BLANK
RGB SEARCH
STANDBY/ON
KEYSTONE
16
KEYSTONE
CP-S317/327W/最終 03.5.27 2:22 PM ページ 20
© 3M 2003. 3M™ Digital Projector S/X50
21
The projector will automatically exit from MAGNIFY mode if either the INPUT SELECT,
AUTO, ASPECT or VIDEO feature is used, or, if there is a change in the input signal's state.
NOTE
The projector will automatically exit from FREEZE mode if either the POSITION, VOLUME, MUTE, AUTO,
BLANK ON/OFF or MENU ON/OFF feature is used, or, if there is a change in the input signal's state.
If the projector continues projecting the same image for a long time (i.e. you forget to exit FREEZE mode),
the image might possibly remain as an afterimage. Do not leave the projector in FREEZE mode for too long.
NOTE
USING THE MAGNIFY FEATURE
FREEZING THE SCREEN
1
Press the MAGNIFY (ON) button
The projector enters MAGNIFY mode.
2
Press the POSITION button, then use the ,,
, buttons to select the area to enlarge and then
press the POSITION button again to confirm your
selection
3
Press the , buttons to zoom in and
out of the selected area.
Press the MAGNIFY (OFF) button to exit MAGNIFY mode
and restore the screen to normal. (The projector will also
automatically exit MAGNIFY mode if there is a change in the
input signal's state.)
1
Press the FREEZE button
The [II] icon appears and the screen will freeze at
the current image. Press the FREEZE button again
and the [ ] appears as the projector exits FREEZE
mode.
VIDEO
ASPECT
HOME
END
MUTE
PAGE DOWN
KEYSTONEFREEZE
OFF
ON
MENUPOSITION
ENTER
ESC RESET
PAGE UP VOLUME
MAGNIFY
AUTO BLANK
RGB SEARCH
STANDBY/ON
ON
MAGNIFY
MAGNIFY
POSITION
POSITION
HOME
END
MUTE
PAGE DOWN
KEYSTONEFREEZE
OFF
ON
MENUPOSITION
PAGE UP VOLUME
MAGNIFY
FREEZE
CP-S317/327W/最終 03.5.27 2:22 PM ページ 21
© 3M 2003. 3M™ Digital Projector S/X50
Dimension Diagram
Item Specification
Product name Liquid crystal projector
Liquid
crystal
panel
Panel size 1.8 cm (0.7 type)
Drive system TFT active matrix
Pixels
S50480,000 pixels (800 horizontal x600 vertical)
X50786,432 pixels (1024 horizontal x 768 vertical)
Lens Zoom lens F=1.7 ~ 2.1 f=36.8 ~ 47.8 mm
Lamp 150 W UHB
Speaker 1.0W
Power supply AC100 ~ 120V, 2.7A / AC220 ~ 240V, 1.3A
Power consumption 240W
Temperature range 0 ~ 35°C (Operating)
Size 316 (W) x 93 (H) x254 (D) mm (Not including protruding parts)
Weight (mass) 2.9 kg
Terminal
RGB Terminal
rgb in(1, 2) .....................2
VIDEO Terminal
video in ...........................1
s-video in .......................1
component video
(Y, CB
/PB,CR
/PR)......1
AUDIO Terminal
audio in(R, L) .................1
OUT Terminal
rgb out.............................1
CONTROL Terminal
control ............................1
usb .................................1
This specifications are subject to change without notice.
NOTE
SPECIFICATIONS
38
CP-S317/327W/Vol2-E責了 03.5.27 2:31 PM ページ 10
316
91
25493
106
63
mm
© 3M 2003. 3M™ Digital Projector S/X50
39


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for 3m X50 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of 3m X50 in the language / languages: English as an attachment in your email.

The manual is 1,93 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of 3m X50

3m X50 User Manual - German - 41 pages

3m X50 User Manual - Dutch - 41 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info