654565
15
Zoom out
Zoom in
Previous page
1/24
Next page
15© 3M 2012. All rights reserved.
ENGLISH
Product Warranty and Safety Guide3M™ Digital Projector X21i/X26i
Note
Reset the lamp operation hours. See “Reset Lamp Hours” for details.
3. Remove lamp module: Slowly pick up the lamp by the handles (4).
4. Insert lamp module : Insert the new lamp, and retighten rmly the 3 screws
(3)
of the lamp
that are loosened in the previous process to lock it in place.
Optional Lamp:
78-6972-0106-5
(DT01195)
(Contact 3M Customer Service.)
While putting the interlocking parts of the lamp door (2) and the projector together, slide the
lamp door (2) back in place. Then rmly fasten the screw of the lamp door (2).
Note
For maximum lamp life, do not strike or drop, improperly handle, or scratch the lamp glass.
Also, do not install an old or previously used lamp.
1. Remove lamp access door: Loosen the screw (marked by arrow)
(1)
of the lamp door and then
slide and lift the lamp door
(2)
to the side to remove it.
2. Retaining screws : Loosen the 3 screws (marked by arrow)
(3)
of the lamp.
Never loosen any other screws.
Note
All lamp module screws must be loosened. These screws are self-containing screws that
cannot be removed from the lamp module or access door.
(4) Handle
(2) Lamp access door
(1) Screw (3) Screws
15


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for 3m X21i at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of 3m X21i in the language / languages: English as an attachment in your email.

The manual is 2,93 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info