654555
21
Zoom out
Zoom in
Previous page
1/36
Next page
21
Operator’s Guide
3M
Super Close Projection System SCP716
© 3M 2009. All Rights Reserved.
ENGLISH
Operating Instructions
Projector Start Up
Read the Important Safeguards before operating the SCP716. After all cable connections have been completed,
refer to Setup and Configuration, the projector can be powered up.
For best results, please observe the following start up sequence.
1. Power ON all of the connected equipment.
2. Plug the supplied power cord into the AC inlet of the projector.
3. Press the On/Standby button on the projector or remote control. The lamp will turn on and an image will
appear and grow brighter on the screen.
4. If the security feature is activated, enter the 4-digit PIN code.
a. Press the left/right arrow to move the cursor through each PIN field.
b. Press the up/down arrows to change the value in each field.
c. Press the Trigger button on the remote to enter the PIN access code.
PIN Code
5. Check all ventilation slots and clear away any obstructions.
6. Extend or retract front adjustment foot to obtain best image height.
Note: Rotate foot for fine adjustment.
7. Turn the focus adjustment (top of projector) to obtain the best image sharpness.
Stand By Mode
When an image is not being projected, place the unit into standby mode.
1. Press the On/Standby button on the Remote Control or the On/Off button on the I/O Box. When the
message “Press the power button to turn the unit off” displays, press the On/Standby button again.
2. The lamp will switch off and the power button will first turn red indicating the unit is in lockout and then
after 90 seconds the button turns amber to indicate the unit is in standby mode.
Note: In standby mode, the cooling fans will continue to run for 5 minutes and then turn off.
21


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for 3m SCP716 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of 3m SCP716 in the language / languages: English as an attachment in your email.

The manual is 1,1 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of 3m SCP716

3m SCP716 User Manual - German - 32 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info