654495
32
Zoom out
Zoom in
Previous page
1/35
Next page
3M IPC 2000 3M
Multimedia Projector MP8760 27
ENGLISH
A-3. Changing Of The IR-Remote-Control Address
Changing of the IR-Remote-Control address:
You can choose one out of four different IR-RC addresses for the projector, so you can control four projectors
separately without any interferencies to another projector.
To change an address from the standard address #1, go to the Advanced Setup menu and choose an address of your
choice under the menu item RC Address (1...4). Confirm your selection with the Enter button.
After this point you can't control the projector with the IR-RC transmitter anymore until you change the transmitter
address to the same address. (Of course, you still can enter the menu system and change back the address with the
Control Panel of the projector!)
To change the address of the IR-RC transmitter, please press the Mode button and an address number (buttons 1,2,3
or 4) simultaneously for 4 seconds on the IR-RC transmitter.
After this you should be able to control the projector by IR-RC again if you've choosen the same address for the
projector and the IR-RC transmitter.
A-4. Resetting The Projector To Factory Default Settings
The factory default settings of the projector can be restored by pressing Enter and Mute simultaneously on the
control panel when switching on the main power switch of the projector and pressing the Standby button afterwards.
The projector will start immediately and the message “Parameter factory settings restored” displayed in the starting
screen will indicate the default settings are reset.
If you've had selected another menu language as english, which is the default language, you'll have to select your
menu language again.
32


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for 3m MP8760 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of 3m MP8760 in the language / languages: English as an attachment in your email.

The manual is 1,07 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of 3m MP8760

3m MP8760 User Manual - German - 32 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info