5587
14
Zoom out
Zoom in
Previous page
1/28
Next page
3M
Multimedia Projector MP8755/MP8755L/MP8770/MP8770L
© 3M 2000
ENGLISH
12
1. Make all cable connections and line hookups with the power off.
2. Turn on the projectors MAIN POWER SWITCH
OI
. The POWER indicator will light up orange.
3. Press the STANDBY/ON button
STANDBY ON
. The POWER indicator blinks (green) and then lights (green).
The POWER indicator will blink green during warm-up and lamp ignition. When power is turned off,
there is a 60 second reset period before the STANDBY/ON button will function again.
4. Adjust the screen size by pressing the ZOOM button.
+
ZOOM
5. Adjust the focus by pressing the focus button.
+
FOCUS
Press any other button to make the focus screen disappear.
6. Turn on all connected equipment. Refer to Section 2.3.
7. Press the INPUT button
INPUT
on the projector or the INPUT SELECT (VIDEO or RGB) button on the
remote to select the source of the signal to be projected on the screen. The selected signal input is
displayed at the bottom right of the screen. The display will show the last selected input source before
power was turned off.
3.2 Projector Shutdown
1. Press and hold the STANDBY/ON button
STANDBY ON
for 1 second. The POWER indicator blinks orange and the lamp turns
off. After approximately 1 minute, the fan stops and the indicator stays orange.
2. Turn off the projectors MAIN POWER SWITCH
OI
.
3. Attach lens cap to protect projection lens.
4. Disconnect cables if moving projector to new location.
Section 3: Basic Operations
Figure 3.1 Projector Controls
3.1 Projector Startup
Caution
MP8770
+
Z
O
O
M
M
U
T
E
IN
P
U
T
S
T
A
N
D
B
Y
O
N
R
E
S
E
T
P
O
W
E
R
L
A
M
P
T
E
M
P
M
E
N
U
+
F
O
C
U
S
MP8770
P
OR
T
A
BL
E PR
O
JE
CT
O
R
OI
+
ZOOM
MUTE INPUT
STANDBY ON
RESET
POWERLAMP TEMP
MENU
+
——
FOCUS
EPS-130A
Do not turn off the MAIN POWER SWITCH before pressing the STANDBY/ON button. After the STANDBY/ON button is
pressed, the fan rotates for about 1 minute to cool the projector.
14


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for 3m MP8755 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of 3m MP8755 in the language / languages: English as an attachment in your email.

The manual is 1,5 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of 3m MP8755

3m MP8755 User Manual - German - 26 pages

3m MP8755 User Manual - Dutch - 28 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info