5571
22
Zoom out
Zoom in
Previous page
1/38
Next page
ENGLISH
20
3M 1997
3M
Multimedia Projector MP8660
6-2. MP8660 Lamp Replacement
To replace the lamp on the 3MMP8660 Multimedia Projector, you will need the following:
2.5 mm hex wrench (shipped with replacement lamp module)
Metal halide lamp 78-6969-8460-4
!
Caution
Lamp and adjacent metal parts become extremely hot and can cause burns to your
fingers. Allow the projector to cool for at least 1 hour before replacing the lamp.
!
Caution
Do not touch the inside of the lamp glass with your fingers. Oil from your fingers can
contaminate the lamp glass and cause it to crack or burst.
!
Caution
Use care when inserting or removing the lamp module from the projector. Excessive
force can cause damage to the lamp or projector.
1. Power OFF: Press the Standby/ON button and wait for the fan motor to cycle off. Then, turn off the power switch
and UNPLUG THE POWER CORD.
2. Allow projector to cool: If the projector is at operating temperature, wait one hour to allow the metal parts to cool
before continuing.
3. Remove Lamp Access Door: Use a 2.5 mm hex wrench to unscrew the lamp cover retaining screws (1) and gently
open the cover. Set aside (2).
4. Remove Lamp Module: Slide the old lamp module (4) out of the projector body.
5. Insert Lamp Module: Carefully insert the new lamp module (5) into the opening and slide it all the way back into
place. Check the lamp module to be sure that it is fully inserted and flush against the back wall.
6. Secure Lamp Module: Tighten the lamp module retaining screws (6) to secure the lamp in place.
7. Close and Secure Door: Close lamp access door (7) and tighten the retaining screws (8) to secure the door. Turn
on projector and test lamp. If lamp light blinks green but lamp does not illuminate, reseat lamp (step 6).
1
2
3
4
5
67
8
Figure 6-2. Changing the Lamp
Important
The projection lamp contains mercury. Consult
your local hazardous waste regualtions and
dispose of this lamp in a proper manner.
22


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for 3m MP8660 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of 3m MP8660 in the language / languages: English as an attachment in your email.

The manual is 0,47 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of 3m MP8660

3m MP8660 User Manual - German - 26 pages

3m MP8660 User Manual - Dutch - 26 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info