5569
12
Zoom out
Zoom in
Previous page
1/32
Next page
8
3M 1997
3M Multimedia Projector MP8650
RS-232C Serial Cable/Mouse Receiver Connection
The MP8650 remote control transmitter can be used to control the mouse button functions on your personal
computer (requires serial cable included) or Apple Macintosh type computer (requires Apple Macintosh mouse
receiver which is an accessory).
n Note
Always power down your PC or Apple Macintosh
computer before making any cable connections.
PC Computer: Install the serial cable (Figure 3-8) to connect the serial mouse port on your computer to the
RS-232C terminal on the MP8650 projector. A serial mouse driver must be loaded on your PC computer for
this function to operate properly. It is best to reference the operating instructions for your computer before
connecting an external mouse device of any kind.
To load a serial mouse driver on a computer using Microsoft Windows or Windows for Workgroups, go
into the Windows Setup function. From Program Manager click Main; then click Windows Setup; (note
the current mouse driver that is loaded); click Options; click Change System Settings. Choose Mouse. You
will need to have the Serial Mouse on Comm 1 driver loaded. It will most likely be listed as Serial or Bus
Mouse. Click OK to apply the serial mouse driver. Restart Windows if prompted.
Hint
: To load a serial mouse driver on a computer using MicrosoftWindows95, go into the Control Panel.
Click Start; select Settings; select Control Panel. Click on Mouse; select the General tab; (note the current
mouse driver that is loaded); select Change; select Show all compatible devices; (note the current
Manufacturer and Model); select Standard Mouse Type for Manfacturer; select Standard Serial Mouse.
Click OK to apply the serial mouse driver. Restart windows when prompted.
PC Serial
Mouse Port
Projector
RS232C
Terminal
PC Serial Cable
Figure 3-8. PC Serial Mouse Cable
n Note
Operating the mouse functions through the
MP8650 remote control may disable the internal
pointing device (IPD) on your computer. It is
recommended that you review the operating
instructions for your computer before connecting
an external device of any kind.
See Technical–Appendix for RS32 Serial
Command Codes.
Apple Macintosh: Power off the computer then disconnect the current mouse cable. Now connect the mouse
receiver plug to the computer mouse port (Figure 3-9).
The Apple Macintosh computer mouse can be hooked into the loop allowing both the computer mouse and
MP8650 remote control transmitter to operate the computer mouse button functions. After the mouse receiver
is connected to the mouse port, connect the mouse cable to the mouse receiver plug.
Mouse Port
Mouse Cable
Figure 3-9. Apple Macintosh Mouse Receiver
12


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for 3m MP8650 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of 3m MP8650 in the language / languages: English as an attachment in your email.

The manual is 0,43 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of 3m MP8650

3m MP8650 User Manual - German - 27 pages

3m MP8650 User Manual - Dutch - 25 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info