Manual 3m MP8649 (page 16 of 24) (English)

5567

Zoom out

Zoom in

1/24

ENGLISH-16

((

))

No Signal Menu

The same adjustments and settings are available with the Image and

Options menus when the MENU button is pressed during display of the

“NO INPUT IS DETECTED ON ***” or “SYNC IS OUT OF RANGE

ON ***” message while no signal is received.Select an item with the

and buttons, and start or stop operation with the and buttons.

Table 8. No Signal Menu

VOLUME

BLANK

MIRROR

START UP

MENU COLOR

LANGUAGE

AUTO OFF

SYNC ON G

WHISPER

Item Description

VOLUME

Reduce ↔ Increase

• When this function is used, audio input is automatically switched to video. The

audio input can be switched by moving the DISK PAD left and right during the

display of the volume adjustment bar. The volume adjustment bar is displayed by

pressing VOLUME / button.

BLANK

Select Blank Screen Color: Select the color with the / button.

• When the blank mode is set with BLANK ON, by absence of a signal, or by

input of a non-standard signal, the image is cleared and the complete screen is

displayed in the selected color.

MIRROR

Select Mirror Status: Select the mirror status with the / button.

START UP

Setup Initial Screen Display: Select the TURN ON with the button.

Clear Initial Screen Display: Select the TURN OFF with the button.

• Note that if TURN OFF is selected the blank screen is displayed in blue when

there is no signal.

MENU COLOR

Select Menu Background Color: Select the color with the /

button.

LANGUAGE

Select Menu Display Language: Select the language with the /

button.

AUTO OFF

Set AUTO OFF: Set 1~99 minutes with the / button. The system

automatically enters the standby mode when a signal is not received for

the set time.

Clear AUTO OFF: Select the STOP (0 min.) with the button. When

the STOP is selected the system does not enter the standby mode even

if no signal is received.

SYNC ON G

SYNC ON G Valid: Select the TURN ON with the button.

SYNC ON G Invalid: Select the TURN OFF with the button.

• May not be displayed correctly with some input signals when the SYNC ON G is

valid. In such cases, remove the signal connector so that no signal is received,

set the SYNC ON G to invalid, and reconnect the signal.

WHISPER

Set / Crear WHISPER Mode: Press the / button. When the

WHISPER is selected, the WHISPER mode is active. In the WHISPER

mode, acoustic moise level from the unit is reduced, and brightness

level on screen is a little lower.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of 3m MP8649 in the language / languages: English as an attachment in your email.

The manual is 0,76 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of 3m MP8649

3m MP8649 User Manual - Dutch - 24 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

3m MP8649 Manual

Product: