5561
24
Zoom out
Zoom in
Previous page
1/28
Next page
3M
Multimedia Projector MP8630 © 3M 1997
6.3 Lamp
The following symptoms may indicate a lamp in need of replacement:
A dark picture.
LAMP indicator lights up red.
"CHANGE THE LAMP" message appears on the screen.
24
Replacing the Lamp
6.3.1 Remove lamp access door: The lamp access door is located
on the back of the machine on the right side. Use a phillips
screwdriver to unscrew the cover retaining screws and gently
open the cover and set it aside.
Warning: There are high voltage parts inside the cabinet that
may cause an electric shock. Always unplug
projector when changing lamp.
Warning: Lamp and adjacent metal parts become extremely
hot and can cause severe burns to your fingers.
Allow the projector to cool for at least 1 hour
before replacing the lamp.
6.3.2 Retaining screws: Use a standard screwdriver to unscrew
the lamp module retaining screws.
Note: There are three lamp module screws that must be loosened.
These screws are self-containing screws that cannot be
removed from the lamp module.
6.3.3 Remove lamp module: Grasp the lamp module with the one
hand and the projector body opening with the other hand.
Apply upward pressure to the projector body as you slide the
lamp out.
Display Lamp Operation Hours
If the "CHANGE THE LAMP" message appears on the screen or if there is need to determine the lamp
operation hours, follow these steps:
a) While the projector is running, press and hold the timer button on the remote control for 3 seconds.
b) The operating time of the lamp will be displayed.
c) To reset the timer, press the reset button and select
0 (or CANCEL). The "CHANGE THE LAMP"
message will not come up if the timer is reset.
24


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for 3m MP8630 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of 3m MP8630 in the language / languages: English as an attachment in your email.

The manual is 0,63 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info