5557
24
Zoom out
Zoom in
Previous page
1/32
Next page
3M 1997 3M Multimedia Projector MP8620 23
Appendix C: Detailed Setup Information
C-1. Setting Representation, Resolution, Colors
Most computers do not just support one single screen mode but rather a series of different modes which
differ in type of representation (text or full graphic), resolution (number of pixels) and number of colors.
Pre-stored standard mode settings for a variety of IBM compatible and Apple Macintosh computers help
the projector to recognize the current mode and adjust for optimum performance automatically.
Apart from this you can enter and save additional modes with any parameters by means of the menu
system. An upper limit is given by the maximum admissible pixel rate (Appendix A-1).
Adjust the projector to optimum display quality, as described below, by using the menu control (see
section 4-4). All steps described can be carried out via the keyboard or the remote control:
1.
Adjust the background as necessary to obtain a display with the highest possible contrast. For use
under Microsoft Windows it is recommended that you close all applications first, and by using the
system control, adjust the desktop background to an even black-and-white raster.
2.
Call up the main menu of the projector by pressing the
MENU
key.
3.
Select the
Setup
menu.
4.
Open the
Setup
menu by pressing the
ENTER
key.
The current mode is displayed in the title block of the
Setup
menu. Change the mode field if
desired. Confirm your selection by pressing the
ENTER
key
5.
Move to menu item
Palette
and select the desired chromatic resolution.
If desired, select an image format with a converted coding of pixel and line numbers to adapt to
the current screen mode. Therefore move to the menu item
Pixel
and select the image resolution.
Use
800x600
for unscaled representation.
6.
Select the menu item
Brightness
and correct the setting so that white areas are projected with
maximum intensity. Press the
ENTER
key for automatic adjustment.
Look at a finely structured area with grid lines. This area may have vertical interference lines
superimposed on it.
7.
Select the menu item
Tracking
(image width) and adjust for minimum interference. The direction
of adjustment is correct when the number of lines decreases. The setting is optimal when no more
interference lines can be seen. An automatic setting of tracking and synchronization can be called
up by operating the
ENTER
key. This may not work, if a uniform pattern is displayed on the
projector.
24


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for 3m MP8620 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of 3m MP8620 in the language / languages: English as an attachment in your email.

The manual is 0,4 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of 3m MP8620

3m MP8620 User Manual - German - 33 pages

3m MP8620 User Manual - Dutch - 33 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info