654488

3m MP7640 Manual

32
Zoom out
Zoom in
Previous page
1/40
Next page
3M
™
Multimedia Projector MP7640
32
© 3M IPC 2000
Section 9: Appendix
Requesting projector status (Get command)
1. Send the request code Header + Command data (‘02H’ + ‘00H’ + ‘xxH’ + ‘yyH’ + ‘00H’) from the
computer to the projector.
2. The projector returns the response code ‘1DH’ + data (2 bytes) to the computer.
Changing the projector settings (Set command)
1. Send the setting code Header + Command data (‘01H’ + ‘00H’ + ‘xxH’ + ‘yyH’ + data) from the
computer to the projector.
2. The projector changes the setting based on the above setting code.
3. The projector returns the response code ‘06H’ to the computer.
Using the projector default settings (Reset command)
1. The computer sends the default setting code Header + Command data (‘06H’ + ‘00H’ + ‘xxH’ + ‘yyH’ +
‘00H’) to the projector.
2. The projector changes the specified setting based to the default value.
3. The projector returns the response code ‘06H’ to the computer.
Increasing the projector setting value (Increment command)
1. The computer sends the command code (‘04H’ + ‘00H’ + ‘xxH’ + ‘yyH’ + ‘00H’ + ‘00H’) to the
projector.
2. The projector increases the setting value on the above setting code.
3. The projector returns the response code ‘06H’ to the computer.
Decreasing the projector setting value (Decrement command)
1. The computer sends the command code (‘05H’ + ‘00H’ + ‘xxH’ + ‘yyH’ + ‘00H’ + ‘00H’) to the
projector.
2. The projector decreases the setting value on the above setting code.
3. The projector returns the response code ‘06H’ to the computer.
When a command sent by the projector cannot be understood by the computer
When the command sent by the projector cannot be understood, the error command ‘15H’ is returned by the
computer. Sometimes the projector ignores RS-232C commands during other works. If the error command
‘15H’ is returned, please send the same command again.
When data sent by the projector cannot be practiced
When the command sent by the projector cannot be practiced, the error code ‘1cH’ + ‘xxxxH’ is returned.
When the data length is greater than indicated by the data length code, the projector will ignore the excess
data code.
Conversely, when the data length is shorter than indicated by the data length code, an error code will be
returned to the projector.
Caution
• Operation cannot be guaranteed when the projector receives an undefined command
or data.
• Provide an interval of at least 40 ms between the response code and any other code.
• The projector outputs test data when the power supply is switched ON, and when
the lamp is lit. Ignore this data.
• Commands are not accepted during warm-up.
… 32 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for 3m MP7640 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of 3m MP7640 in the language / languages: English as an attachment in your email.

The manual is 1,9 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of 3m MP7640

3m MP7640 User Manual - German - 28 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info