214745
28
Zoom out
Zoom in
Previous page
1/36
Next page
28
3M
Digital Media System 700 Series
© 3M 2007. All Rights Reserved.
ENGLISH
Troubleshooting
Troubleshooting
Error Messages
When the unit’s power is ON, messages such as those shown below may be displayed. When any such message
is displayed on the screen, please respond as described below. If the same message is displayed after the
treatment, or if a message other than the following appears, please contact your dealer or service company.
Message Description
CHANGE THE LAMP AFTER
REPLACING LAMP, RESET THE
LAMP TIMER.(*1)
Lamp usage time is approaching 2000 hours. (*2)Preparation of a
new lamp and an early lamp change is recommended. After you have
changed the lamp, please be sure to reset the lamp timer.
CHANGE THE LAMP AFTER
REPLACING LAMP, RESET THE
LAMP TIMER.(*1) THE POWER
WILL TURN OFF AFTER ** hr.
(*1)
Lamp usage time is approaching 2000 hours. (*2)A lamp change within
** hours is recommended. When lamp usage reaches 2000 hours, the
power will automatically be turned OFF. Please change the lamp by
referring to the "Maintenance" section of this manual. After you have
changed the lamp, please be sure to reset the lamp timer.
NO INPUT IS DETECTED ON *** There is no input signal. Please confirm the signal input connection, and
the status of the signal source.
SYNC IS OUT OF RANGE ON
***FH *****kHz ***FV**Hz
The horizontal or vertical wavelength of the inputted signal is outside
of the response parameters of this unit. Please confirm the specs for this
unit or the signal source specs.
CHECK THE AIR FLOW The internal portion temperature is rising. Please turn the power OFF,
and allow the unit to cool down at least 20 minutes. After having
confirmed the following items, please turn the power ON again. Please
turn the power ON again.
• Is there blockage of the air passage aperture?
• Is the air filter dirty?
• Does the peripheral temperature exceed 35˚C?
NOTE
(*1) • Although this message will automatically disappear after 3 minutes, it will reappear every time the power
is turned ON.
(*2) • Lamps have a finite product life. Lamps are characterized by the fact that, after long hours of usage, a
lamp will no longer light up, or the lamp will break or burst. This unit is equipped with an automatic shut-down
function, such that the power will automatically be turned OFF when lamp usage time has reached 2,000 hours.
Please be aware, however, that among lamp types, there are major differences in product lifetimes; a lamp may
thus fail to light even prior to the functioning of the automatic shut-down function of this unit.
28
© 3M 2006. All Rights Reserved.
ENGLISH
28


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for 3m dms 710 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of 3m dms 710 in the language / languages: English as an attachment in your email.

The manual is 0,98 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info